Brass Fittings
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 1/4" TUBE X 1/4" MALE PIPE
X68PMTX4X4
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/4" tubing o.d., 1/4" male pipe
$49.625
$9.925
$9.925
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 1/4" TUBE X 1/8" MALE PIPE
X68PMTX4X2
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Male connector
- Size 1/4" tubing o.d., 1/8" male pipe
$48.65
$9.73
$9.73
BRASS COMPRESSION TEE, UNION 1/4" TUBE
X64X4
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Union tee connector
- Size 1/4" tubing o.d.
$49.635
$9.927
$9.927
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 1/4" TUBE X 3/8" MALE PIPE
X68PMTX4X6
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/4" tubing o.d., 3/8" male pipe
$84.0015
$16.8003
$16.8003
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 3/8" TUBE X 1/8" MALE PIPE
X68PMTX6X2
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 3/8" tubing o.d., 1/8" male pipe
$61.9875
$12.3975
$12.3975
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 3/8" TUBE X 1/4" MALE PIPE
X68PMTX6X4
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 3/8" tubing o.d., 1/4" male pipe
$65.6625
$13.1325
$13.1325
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 3/8" TUBE X 3/8" MALE PIPE
X68PMTX6X6
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 3/8" tubing o.d., 3/8" male pipe
$65.2375
$13.0475
$13.0475
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 1/2" TUBE X 1/4" MALE PIPE
X68PMTX8X4
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/2" tubing o.d., 1/4" male pipe
$97.54
$19.508
$19.508
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 1/2" TUBE X 3/8" MALE PIPE
X68PMTX8X6
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/2" tubing o.d., 3/8" male pipe
$83.42
$16.684
$16.684
PUSH TO CONNECT, BRASS DOT, MALE CONNECTOR, 1/2" TUBE X 1/2" MALE PIPE
X68PMTX8X8
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/2" tubing o.d., 1/2" male pipe
$90.60
$18.12
$18.12
PUSH TO CONNECT, BRASS NON-DOT, MALE CONNECTOR, 1/8" TUBE X 1/16" MALE PIPE
X68PMX2X1
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/8" tubing o.d., 1/16" male pipe.
$99.2625
$19.8525
$19.8525
PUSH TO CONNECT, BRASS, NON-DOT, MALE CONNECTOR, 1/8" TUBE X 1/8" MALE PIPE
X68PMX2X2
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/8" tubing o.d., 1/8" male pipe
$48.575
$9.715
$9.715
PUSH TO CONNECT, BRASS NON-DOT, MALE CONNECTOR, 5/32" TUBE X 1/16" MALE PIPE
X68PMX532X1
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 5/32" tubing o.d., 1/16" male pipe
$78.455
$15.691
$15.691
BRASS TRANSMISSION MALE CONNECTOR 1/8" TUBE X 1/8" PIPE
X68TFX2X2
- Transmission fitting
- These are typically used in pressure protected air transmission applications and air seats.
- The fittings use a notched sleeve to help eliminate stress from over-torque.
- These fittings are used with smaller nylon tubing, usually 1/8" and 5/32".
- These are DOT approved.
- Easy to assemble, no flaring required.
- Size 1/8" tubing o.d., 1/8" male pipe
$37.675
$7.535
$7.535
PUSH TO CONNECT, BRASS NON-DOT, MALE CONNECTOR, 5/32" TUBE X 1/8" MALE PIPE
X68PMX532X2
$50.805
$10.161
$10.161
BRASS TRANSMISSION MALE CONNECTOR 5/32" TUBE X 1/8" PIPE
X68TFX532X2
- Transmission fitting
- These are typically used in pressure protected air transmission applications and air seats.
- The fittings use a notched sleeve to help eliminate stress from over-torque.
- These fittings are used with smaller nylon tubing, usually 1/8" and 5/32".
- These are DOT approved.
- Easy to assemble, no flaring required.
- Size 5/32" tubing o.d., 1/8" male pipe
$84.56
$16.912
$16.912
BRASS COMPRESSION MALE CONNECTOR 1/4" TUBE X 1/8" PIPE
X68X4
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 1/4" tubing o.d., 1/8" male pipe
$28.11
$5.622
$5.622
BRASS COMPRESSION MALE CONNECTOR 5/16" TUBE X 1/8" PIPE
X68X5
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 5/16" tubing o.d., 1/8" male pipe
$37.785
$7.557
$7.557
BRASS COMPRESSION MALE CONNECTOR 3/8" TUBE X 1/4" PIPE
X68X6
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 3/8" tubing o.d., 1/4" male pipe
$41.0575
$8.2115
$8.2115
BRASS COMPRESSION MALE CONNECTOR 1/2" TUBE X 3/8" PIPE
X68X8
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 1/2" tubing o.d., 3/8" male pipe
$46.00
$9.20
$9.20
BRASS COMPRESSION MALE ELBOW 1/8" TUBE X 1/8" MALE PIPE
X69X2
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 1/8" tubing o.d., 1/8" male pipe
$37.40
$7.48
$7.48
BRASS COMPRESSION MALE ELBOW 1/4" TUBE X 1/8" MALE PIPE
X69X4
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 1/4" tubing o.d., 1/8" male pipe
$44.175
$8.835
$8.835
Refine