Pins
COTTER PIN - ZINC 5/16" X 3"
X56X3CP
- Metal, extended prong type cotter pin
- Extended prong makes separating the tines easier
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position
- When used with castle or slotted nuts, it becomes a safety locking device
- Low carbon steel, zinc plated material
- Diameter is 5/16"
- Length is 3"
$39.455
$1.5782
$1.5782
ROLL PIN 7/32" X 1-1/4"
X732114RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 7/32
- Length is 1-1/4 inch
$59.92
$0.5992
$0.5992
ROLL PIN - PLAIN FINISH 7/32" X 1-3/4"
X732134RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 7/32
- Length is 1-3/4 inch
$19.8625
$0.7945
$0.7945
LYNCH PIN 5/16 DIAMETER 1 9/16 PIN LENGTH
XB213-20
- 5/16" standard ring
- Nominal size 5/16" x 1-9/16"
- Also called a Clik pin
$18.285
$1.8285
$1.8285
LYNCH PIN 7/16 DIAMETER 1 3/4 PIN LENGTH
XB217-20
- 7/16" heavy duty ring
- Nominal size 7/16" x 1-3/4"
- Also called a Clik pin
$31.681
$3.1681
$3.1681
SNAP PIN DOUBLE WIRE RO 1/4" X 1-3/4"
XB28-01
- Shank Length: 2"
- Effective Length: 1-3/4"
- Round Two Wire Snap Pin
- Diameter: 1/4"
- Low Carbon Steel
- Zinc Clear
$22.737
$2.2737
$2.2737
SNAP PIN 3/8 X 2 1/2 SQUARE HANDLE DOUBLE WIRE
XB28-06
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 3/8" diameter
- 2-1/2" grip
$39.798
$3.9798
$3.9798
SNAP PIN 5/16 X 2 1/2 DOUBLE WIRE
XB28-02
- Double wire square handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 5/16" diameter
- 2-1/2" grip
$34.068
$3.4068
$3.4068
SNAP PIN DOUBLE WIRE HANDLE 5/16 X 1 3/4
XB28-08
- Shank Length: 2"
- Effective Length: 1-3/4"
- Round Two Wire Snap Pin
- Diameter: 5/16"
- Low Carbon Steel
- Zinc Clear
$31.304
$3.1304
$3.1304
ROLL PIN - PLAIN FINISH 1/4" X 1-1/4"
X14114RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 1-1/4 inch
$39.08
$0.7816
$0.7816
ROLL PIN - PLAIN FINISH 1/4" X 1-3/4"
X14134RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 1-3/4 inch
$46.795
$0.9359
$0.9359
HITCH PIN - ZINC .177 DIAMETER, 3-1/4 LENGTH
HP206
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-1/4 inches.
$33.7425
$1.3497
$1.3497
HITCH PIN - ZINC .093 DIAMETER, 2-5/16" LENGTH
HP207
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.093.
- Length of 2-5/16 inches.
$11.40
$0.456
$0.456
HITCH PIN - ZINC .177 DIAMETER, 3-3/4 LENGTH
HP208
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-3/4 inches.
$40.1375
$1.6055
$1.6055
HITCH PIN - ZINC .08 DIAMETER, 1-3/16 LENGTH
HP213
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.08.
- Length of 1-3/16 inches.
$17.055
$0.3411
$0.3411