Brass Fittings
BRASS TRANSMISSION MALE CONNECTOR 5/32" TUBE X 1/16" PIPE
X68TFX532X1
- Transmission fitting
- These are typically used in pressure protected air transmission applications and air seats.
- The fittings use a notched sleeve to help eliminate stress from over-torque.
- These fittings are used with smaller nylon tubing, usually 1/8" and 5/32".
- These are DOT approved.
- Easy to assemble, no flaring required.
- Size 5/32" tubing o.d., 1/16" male pipe
$79.4815
$15.8963
$15.8963
BRASS COMPRESSION MALE CONNECTOR 1/8" TUBE X 1/8" PIPE
X68X2
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 1/8" tubing o.d., 1/8" male pipe
$29.70
$5.94
$5.94
BRASS COMPRESSION MALE CONNECTOR 3/16" TUBE X 1/8" PIPE
X68X3
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 3/16" tubing o.d., 1/8" male pipe
$24.75
$4.95
$4.95
BRASS COMPRESSION MALE CONNECTOR 3/16" TUBE X 1/4" PIPE
X68X3X4
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 3/16" tubing o.d., 1/8" male pipe
$53.6625
$10.7325
$10.7325
BRASS COMPRESSION MALE CONNECTOR 1/4" TUBE X 1/4" PIPE
X68X4X4
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 1/4" tubing o.d., 1/4" male pipe
$20.31
$4.062
$4.062
BRASS COMPRESSION MALE CONNECTOR 5/16" TUBE X 1/4" PIPE
X68X5X4
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- Male connector
- Size 5/16" tubing o.d., 1/4" male pipe
$39.05
$7.81
$7.81
BRASS COMPRESSION MALE ELBOW 3/16" TUBE X 1/8" MALE PIPE
X69X3
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 3/16" tubing o.d., 1/8" male pipe
$48.825
$9.765
$9.765
BRASS COMPRESSION MALE ELBOW 1/4" TUBE X 1/4" MALE PIPE
X69X4X4
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 1/4" tubing o.d., 1/4" male pipe
$42.25
$8.45
$8.45
BRASS COMPRESSION MALE ELBOW 3/8" TUBE X 3/8" MALE PIPE
X69X6X6
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 3/8" tubing o.d., 3/8" male pipe
$43.635
$8.727
$8.727
BRAKE HYDRAULIC BRAKE TEE
X7900
- For Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas
- Excellent vibration resistance
- Temperature Range - -650°F to +250°F
- Meets functional requirements of SAE J530, J531
$14.5393
GARDEN HOSE, BRASS, 3/4" FEMALE SWIVEL X 3/8" HOSE BARB
X90GH-12-6
- Garden Hose adapter
- Female connectors should have a rubber washer installed prior to usage, included with fittings
- For 3/8 hose ID
- Female garden hose swivel, 3/4 with 11-1/2" theads
$11.2545
SAE 45 DEGREE FLARE FEMALE CONNECTOR 3/8" TUBE X 1/4" FEMALE PIPE
X46X6
- SAE 45 degree flare fitting
- Used with copper, brass, aluminum and steel hydraulic tubing
- Female connector
- Size 3/8" tubing o.d., 1/4" female pipe
$3.48
SAE 45 DEGREE FLARE NUT 3/8"
X1110X6
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
$62.37
$6.237
$6.237
PUSH TO CONNECT, NON-DOT, BRASS UNION, 1/8" TUBE
X1162X2
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
$78.6315
$15.7263
$15.7263
PUSH TO CONNECT, NON-DOT, BRASS UNION, 3/16" TUBE
X1162X3
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
$84.7875
$16.9575
$16.9575
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, STRAIGHT MALE CONNECTOR, 1/4" TUBE X 1/8" PIPE
X1168X4
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
$61.3125
$12.2625
$12.2625
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, STRAIGHT MALE CONNECTOR, 3/8" TUBE X 1/4" PIPE
X1168X6
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
- 3/8" tube to 1/4" male pipe
$84.18
$16.836
$16.836
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, SWIVEL, MALE 90 DEGREE ELBOW, 5/32" TUBE X 1/8" PIPE
X1169X2.5S
- Push to connect fitting
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- 90° male elbow
- Size 5/32" tubing o.d., 1/8" male pipe
$204.225
$20.4225
$20.4225
Refine