Screws
METAL SCREW PHILLIPS FLAT HEAD #10 X 1-1/2"
X10X112FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1-1/2 inches
$22.65
$0.2265
$0.2265
TEK SCREW PHILLIPS PAN HEAD #10 X 1-1/2"
X10X112PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
$25.20
$0.252
$0.252
TEK SCREW SQUARE DRIVE PAN HD #10 X 1-1/2"
X10X112RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1-1/2"
$76.96
$0.7696
$0.7696
SHEET METAL SCREW SQ DR PAN HD #10 X 1-1/2"
X10X112RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 1-1/2"
$27.00
$0.27
$0.27
METAL SCREW SQ DRIVE FLAT HEAD #10 X 1-1/2"
X10X112FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1-1/2 inches
$15.90
$0.159
$0.159
TEK SCREW PHILLIPS PAN HEAD #10 X 1-1/2" BLACK
X10X112PT2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel Black Oxide
$76.16
$0.7616
$0.7616
METAL SCREW PHILLIPS FLAT HEAD #10 X 1-1/4"
X10X114FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1-1/4 inches
$21.75
$0.2175
$0.2175
SHEET METAL SCREW SQ DR PAN HD #10 X 1-1/4"
X10X114RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 1-1/4"
$32.28
$0.3228
$0.3228
TEK SCREW SQUARE DRIVE PAN HD #10 X 1-1/4"
X10X114RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1-1/4"
$56.96
$0.5696
$0.5696
TEK SCREW PHILLIPS PAN HEAD #10 X 1-1/4"
X10X114PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
$33.00
$0.33
$0.33
TEK SCREW SQUARE-DRIVE PAN HD #10 X 1-1/4" BLACK PAINTED HEAD, 100/BX
X10X114RHT2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Round washer head, phillips drive
- Zinc plated steel with black painted heads
$83.51
TEK SCREW HEX WASHER HD #10 X 1-1/4", STAINLESS
X10X114TS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Stainless Steel
- Rockwell hardness C55 minimum.
- Diameter: 10
- Length: 1-1/4"
$52.64
$0.5264
$0.5264
SHEET METAL SCREW SLOTTED HEX WASHER HD #10 X 1/2" STAINLESS
X10X12HSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Hex head.
$33.00
$0.33
$0.33
TEK SCREW HEX WASHER HD #10 X 1-1/2" STAINLESS
X10X112TS
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Stainless Steel
- Rockwell hardness C55 minimum
$58.56
$0.5856
$0.5856
METAL SCREW PAN HEAD PHILLIPS #10 X 1/2" BLACK OXIDE
X10X12P2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
$98.00
$0.98
$0.98
SHEET METAL SCREW PHIL FLAT HD #10 X 1/2" STAINLESS
X10X12FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 10 X 1/2"
$21.90
$0.219
$0.219
SHEET METAL SCREW SQ DR PAN HD #10 X 1/2"
X10X12RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 10
- Screw length is 1/2 inch
$17.85
$0.1785
$0.1785
TEK SCREW SQUARE DRIVE PAN HD #10 X 1/2"
X10X12RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1/2"
$29.16
$0.2916
$0.2916
Refine
6 More
2 More