Ram Products | Brass Fittings

BRASS COMPRESSION NUT 1/8"

X61X2

Compression brass fitting
Meets functional requirements of SAE J512.
No flaring, soldering or other preparation of tubing necessary to assemble.
It is used with aluminum, copper and plastic tubing.
Not recommended for use with steel tubing.
Brass compression nut
Size 1/8" tubing o.d.

$10.752
$1.0752

+ -

BRASS COMPRESSION NUT 1/4"

X61X4

Compression brass fitting
Meets functional requirements of SAE J512.
No flaring, soldering or other preparation of tubing necessary to assemble.
It is used with aluminum, copper and plastic tubing.
Not recommended for use with steel tubing.
Brass compression nut
Size 1/4" tubing o.d.

$24.44
$2.444

+ -

BRASS COMPRESSION NUT 1/2"

X61X8

Compression brass fitting
Meets functional requirements of SAE J512.
No flaring, soldering or other preparation of tubing necessary to assemble.
It is used with aluminum, copper and plastic tubing.
Not recommended for use with steel tubing.
Brass compression nut
Size 1/2" tubing o.d.

$35.148
$3.5148

+ -

BRASS COMPRESSION NUT 3/8"

X61X6

Compression brass fitting
Meets functional requirements of SAE J512.
No flaring, soldering or other preparation of tubing necessary to assemble.
It is used with aluminum, copper and plastic tubing.
Not recommended for use with steel tubing.
Brass compression nut
Size 3/8" tubing o.d.

$39.18
$3.918

+ -

PUSH TO CONNECT, NICKEL PLATED BRASS, UNION 5/32" TUBE

X62PL-532

Ready to use compact one-piece fittings for use with most thermoplastic tubing.
Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
No special tools are needed for assembly.
Designed to be used with no tube support.
Union connector

$82.24
$16.448

+ -

PUSH TO CONNECT BRASS DOT UNION 5/8" TUBE

X62PMTX10

They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 5/8" tubing o.d.

$162.375
$32.475

+ -

PUSH TO CONNECT BRASS DOT UNION 3/4" TUBE

X62PMTX12

They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 3/4" tubing o.d.

$68.208

+ -

PUSH TO CONNECT BRASS UNION 1/8" TUBE

X62PMTX2

They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 1/8" tubing o.d.

$84.98
$16.996

+ -

PUSH TO CONNECT BRASS DOT UNION 1/4" TUBE

X62PMTX4

These are the quick disconnect version of nylon air brake (DOT) brass fittings.
They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 1/4" tubing o.d.

$66.9375
$13.3875

+ -

PUSH TO CONNECT BRASS DOT UNION 5/32" TUBE

X62PMTX532

They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 5/32" tubing o.d.

$88.16
$17.632

+ -

PUSH TO CONNECT BRASS DOT UNION 3/8" TUBE

X62PMTX6

These are the quick disconnect version of nylon air brake (DOT) brass fittings.
They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 3/8" tubing o.d.

$82.72
$16.544

+ -

PUSH TO CONNECT BRASS DOT UNION 3/16" TUBE

X62PMX3

These are the quick disconnect version of nylon air brake (DOT) brass fittings.
They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 3/16" tubing o.d.

$114.75
$22.95

+ -

PUSH TO CONNECT BRASS UNION 1/8" TUBE

X62PMX2

These are the quick disconnect version of nylon air brake (DOT) brass fittings.
They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 1/8" tubing o.d.

$71.40
$14.28

+ -

PUSH TO CONNECT BRASS DOT UNION 1/2" TUBE

X62PMTX8

These are the quick disconnect version of nylon air brake (DOT) brass fittings.
They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 1/2" tubing o.d.

$98.1375
$19.6275

+ -

PUSH TO CONNECT BRASS DOT UNION 5/32" TUBE

X62PMX532

These are the quick disconnect version of nylon air brake (DOT) brass fittings.
They are DOT approved and will be marked as such.
Used with SAE J844 nylon tubing, no special tools required.
There are no nuts or sleeves used in their application.
Size 5/32" tubing o.d.

$88.16
$17.632

+ -

BRASS PEX UNION 1/2" PUSH TO CONNECT

X62PEX8

QuickBite Pex Union, no crimping, gluing or soldering required. Push the tube in and you're done
Certified to 200PSI and 180°F
Works with PEX, CPVC and copper tubing
PEX stiffener pre-installed - Easy to remove for PVC or copper installations
Lead-free brass
Full flow
Removable and resusable
1/2" tube to 1/2" tube

$19.48

+ -

BRASS TRANSMISSION UNION 1/8"

X62TFX2

Transmission fitting
These are typically used in pressure protected air transmission applications and air seats.
The fittings use a notched sleeve to help eliminate stress from over-torque.
These fittings are used with smaller nylon tubing, usually 1/8" and 5/32".
These are DOT approved.
Easy to assemble, no flaring required.
Size 1/8" tubing o.d.

$52.875
$10.575

+ -

BRASS TRANSMISSION UNION 5/32"

X62TFX532

Transmission fitting
These are typically used in pressure protected air transmission applications and air seats.
The fittings use a notched sleeve to help eliminate stress from over-torque.
These fittings are used with smaller nylon tubing, usually 1/8" and 5/32".
These are DOT approved.
Easy to assemble, no flaring required.
Size 5/32" tubing o.d.

$79.475
$15.895

+ -