Abrasives
ABRASIVE HAND PAD GENERAL PURPOSE
AHPGP
- Non-woven nylon/polyester fiber.
- Very fine aluminum oxide mineral.
- Load resistant.
- 9" long x 6" wide.
- 1/4" thick.
- Color: maroon.
- Most universally used in a variety of applications.
- Excellent starting point to clean, finish, grain, denib and defuzz.
- May be used by hand, with a hand pad block, or on an in-line sander.
$117.46
$5.8728
$5.8728
CUT OFF WHEEL HIGH SPD TYPE 1 3" DIAM, .035" W, 3/8"
COW3X.035X38
- 3" Diameter
- .035" Width
- 3/8" Bore
- 25,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
$8.14
CUT OFF WHEEL ARBOR ADAPTOR 1/4" SHANK X 3/8" ARBOR
COWA14X38
- Mandrel for cut off wheels.
- 1/4” and 3/8” combination mandrel.1/4" shank.
- 1/4" shank.
$30.4125
CUT OFF WHEEL HIGH SPD TYPE 1 4" DIAM, 1/16" W, 3/8"
COW4X16X38
- 4" Diameter
- 1/16" Width
- 3/8" Bore
- 19,000 Max RPM
- Type 1 fast cutting cut off wheel. Square, burr-free cutting.
- For use with die grinder.
- Aluminum oxide grain.
- Hard bond for aggressive cutting on rough applications.
- Great for ferrous metals (iron, steel, welds, etc.). Also good for stainless steel
$9.75
CHOP SAW WHEEL TYPE 1, 14" DIAM, 3/32" WIDTH, 1"
CSW14X332X1
- 14" Diameter
- 3/32" Width
- 1" Bore
- 4,400 Max RPM
- Iron worker chop saw wheel. Fast cutting.
- Specially formulated for use on low horsepower chop saw machines for fast cutting with minimal pressure.
- Aluminum oxide grain.
- Excellent for use on angle iron, channel iron, heavy rebar, and other ferrous metals.
- For use in structural metal applications.
$31.6875
FLAP DISC - JUMBO W/HUB 4-1/2" D, 5/8"-11 ARB 120 GRIT
FDJ412X58HX120
- 4-1/2" Diameter
- 5/8"-11 Arbor
- 120 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
$28.875
FLAP DISC - JUMBO W/HUB 4-1/2" D, 5/8"-11 ARB 40 GRIT
FDJ412X58HX40
- 4-1/2" Diameter
- 5/8"-11 Arbor
- 40 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
$28.875
FLAP DISC - JUMBO W/HUB 4-1/2" D, 5/8"-11 ARB 60 GRIT
FDJ412X58HX60
- 4-1/2" Diameter
- 5/8"-11 Arbor
- 60 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
$28.875
FLAP DISC - JUMBO W/HUB 4-1/2" D, 5/8"-11 ARB 80 GRIT
FDJ412X58HX80
- 4-1/2" Diameter
- 5/8"-11 Arbor
- 80 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
$28.875
FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 120 GRIT
FDJ412X78X120
- 4-1/2" Diameter
- 7/8" Arbor
- 120 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
$24.1875
FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 40 GRIT
FDJ412X78X40
- 4-1/2" Diameter
- 7/8" Arbor
- 40 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
$24.1875
FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 60 GRIT
FDJ412X78X60
- 4-1/2" Diameter
- 7/8" Arbor
- 60 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
$24.1875
FLAP DISC - JUMBO 4-1/2" D, 7/8" ARB 80 GRIT
FDJ412X78X80
- 4-1/2" Diameter
- 7/8" Arbor
- 80 grit
- For use with an angle grinder.
- Made with premium zirconium abrasive material which provides long life and high stock removal.
- Heavy duty for tougher applications.
- High density design that contains more flaps that are larger to provide long life.
- Provides excellent operator control resulting in a consistent finish with controlled stock removal rates.
- High pressure is ideal for removing deeper scratches from the work surface.
- For use on ferrous and non-ferrous metals,stainless steel, high tensile steel and titanium.
$24.1875
FLAP WHEEL W/1/4"MANDREL 1-1/2" DIAM, 1" W, 60 GRIT
FW112X1X60
- Straight 1/4” mandrel.
- 1-1/2" Diameter
- 1" Width
- 60 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$11.039
FLAP WHEEL W/1/4"MANDREL 1-1/2" DIAM, 1" W, 80 GRIT
FW112X1X80
- Straight 1/4” mandrel.
- 1-1/2" Diameter
- 1" Width
- 80 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$11.3229
FLAP WHEEL W/1/4"MANDREL 2-1/2" DIAM, 1" W, 80 GRIT
FW212X1X80
- Straight 1/4” mandrel.
- 2-1/2" Diameter
- 1" Width
- 80 grit.
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$18.1368
FLAP WHEEL W/1/4"MANDREL 2" DIAM, 1" W, 80 GRIT
FW2X1X80
- Straight 1/4” mandrel.
- 2" Diameter
- 1" Width
- 80 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$13.1512
FLAP WHEEL W/1/4"MANDREL 2" DIAM, 1" W, 120 GRIT
FW2X1X120
- Straight 1/4” mandrel.
- 2" Diameter
- 1" Width
- 120 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$15.6897
FLAP WHEEL W1/4" MANDREL 2-1/2" DIAM, 1" W, 60 GRIT
FW212X1X60
- Straight 1/4” mandrel.
- 2-1/2" Diameter
- 1" Width
- 60 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$181.37
$18.1368
$18.1368
FLAP WHEEL W/1/4"MANDREL 1" DIAM, 1" W, 120 GRIT
FW1X1X120
- Straight 1/4” mandrel.
- 1" Diameter
- 1" Width
- 120 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$11.9322
FLAP WHEEL W/1/4"MANDREL 1" DIAM, 1" W, 80 GRIT
FW1X1X80
- Straight 1/4” mandrel.
- 1" Diameter
- 1" Width
- 80 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$9.738
FLAP WHEEL W/1/4"MANDREL 2" DIAM, 1" W, 60 GRIT
FW2X1X60
- Straight 1/4” mandrel.
- 2" Diameter
- 1" Width
- 60 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$15.6897
FLAP WHEEL W/1/4"MANDREL 3" DIAM, 1" W, 60 GRIT
FW3X1X60
- Straight 1/4” mandrel.
- 3" Diameter
- 1" Width
- 60 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$19.0148
FLAP WHEEL W/1/4"MANDREL 3" DIAM, 1" W, 80 GRIT
FW3X1X80
- Straight 1/4” mandrel.
- 3" Diameter
- 1" Width
- 80 grit
- General purpose flap wheel.
- Premium aluminum oxide grain.
- Excellent for cleaning, deburring, polishing and blending.
- For use on ferrous and non-ferrous metals such as iron, steel, aluminum, copper, etc.
- Also great on wood, plastic, fiberglass, etc.
$19.0148