Brass Fittings
BRASS COMPRESSION MALE ELBOW 5/16" TUBE X 1/8" MALE PIPE
X69X5
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 5/16" tubing o.d., 1/8" male pipe
$35.20
$7.04
$7.04
BRASS COMPRESSION MALE ELBOW 3/8" TUBE X 1/4" MALE PIPE
X69X6
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 3/8" tubing o.d., 1/4" male pipe
$55.89
$11.178
$11.178
BRASS COMPRESSION MALE ELBOW 1/2" TUBE X 3/8" MALE PIPE
X69X8
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 1/2" tubing o.d., 3/8" male pipe
$65.6415
$13.1283
$13.1283
BRASS COMPRESSION MALE ELBOW 1/2" TUBE X 1/2" MALE PIPE
X69X8X8
- Compression brass fitting
- Meets functional requirements of SAE J512.
- No flaring, soldering or other preparation of tubing necessary to assemble.
- It is used with aluminum, copper and plastic tubing.
- Not recommended for use with steel tubing.
- 90° male connector
- Size 1/2" tubing o.d., 1/2" male pipe
$72.25
$14.45
$14.45
BRASS ADAPTER 3/4" MALE GARDEN HOSE X 3/4" MALE PIPE THREAD
X71GHX12X12
- Forged and Cast Brass
- Hose Threads: NH, Canadian, SpeciaL
- Corrosion Resistant
- Hydrostatically Tested: 600 PSI
- Hose Threads: NH, Canadian, Special
$10.413
SAE 45 DEGREE FLARE MALE REDUCER UNION 3/8" X 1/2"
X42X8X6
- 45 Degree Flare Fitting
- 1/2" to 3/8" union reducer
- Used with copper, aluminum, and brass
- SAE J512, SAE J513
$19.16
BRASS MALE INVERTED FLARE CONNECTOR 3/8" TUBE X 3/8" PIPE
X202X6X6
- Inverted flare fitting
- 45 Degree Inverted Flare
- Used with copper, brass, aluminum and steel hydraulic tubing
- The seat on this style of fitting is inverted to resist mechanical pullout
- Male connector
- Size 3/8" tubing o.d., 3/8" male pipe
$9.35
PUSH TO CONNECT, NON-DOT BRASS UNION, 1/4" TUBE
X1162X4
- Push to connect fitting
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
- Size 1/4" tubing o.d.
$50.625
$10.125
$10.125
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, 90 DEGREE ELBOW UNION, 1/4" TUBE
X1165X4
- Push to connect fitting
- Designed to be used with no tube support.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- Union elbow.
- Used with most thermoplastic tubing.
- Union elbow connector
- Size 1/4" tubing o.d.
$13.9485
HOSE END MALE PIPE RIGID 1/4" HOSE X 1/4" MALE PIPE
X10004B-104
- Compact one-piece, push-on barbed fittings.
- Quick and economical way to connect tubing.
- Easy to assemble, just push the fitting onto the hose. No hose clamp needed.
- Typical application: Low pressure shop or service air lines.
- Male pipe rigid connector
- Size 1/4" hose i.d., 1/4" male pipe
$56.88
$5.688
$5.688
HOSE MENDER, BARB UNION, 5/16" HOSE
X10005B-Y05
- Compact one-piece, push-on barbed fittings.
- Quick and economical way to connect tubing.
- Easy to assemble, just push the fitting onto the hose. No hose clamp needed.
- Typical application: Low pressure shop or service air lines.
- Union connector (hose mender)
- Size 5/16" hose i.d.
$8.275
HOSE END MALE PIPE RIGID 3/8" HOSE X 1/4" MALE PIPE
X10006B-104
- Quick and economical way to connect tubing.
- Easy to assemble, just push the fitting onto the hose. No hose clamp needed.
- Typical application: Low pressure shop or service air lines.
- Male pipe rigid connector
- Size 3/8" hose i.d., 1/4" male pipe
$30.635
$6.127
$6.127
HOSE END MALE PIPE RIGID 3/8 HOSE 3/8 PIPE
X10006B-106
- Compact one-piece, push-on barbed fittings.
- Quick and economical way to connect tubing.
- Easy to assemble, just push the fitting onto the hose. No hose clamp needed.
- Typical application: Low pressure shop or service air lines.
- Male pipe rigid connector
- Size 3/8" hose i.d., 3/8" male pipe
$73.975
$7.3975
$7.3975
HOSE END FEMALE SWIVEL SAE 45 DEGREE FLARE 3/8" HOSE X 3/8" TUBE
X10006B-406
- Compact one-piece, push-on barbed fittings.
- Quick and economical way to connect tubing.
- Easy to assemble, just push the fitting onto the hose. No hose clamp needed.
- Typical application: Low pressure shop or service air lines.
- SAE 45° flare female swivel connector
- Size 3/8" hose i.d., 3/8" tube
$7.8958
HOSE END MALE PIPE RIGID 1/2" HOSE X 1/4" MALE PIPE
X10008B-104
- Compact one-piece, push-on barbed fittings.
- Quick and economical way to connect tubing.
- Easy to assemble, just push the fitting onto the hose. No hose clamp needed.
- Typical application: Low pressure shop or service air lines.
- Male pipe rigid connector
- Size 1/2" hose i.d., 1/4" male pipe
$9.297
HOSE END SPLICER 1/2 HOSE
X10008B-Y08
- Compact one-piece, push-on barbed fittings.
- Quick and economical way to connect tubing.
- Easy to assemble, just push the fitting onto the hose. No hose clamp needed.
- Typical application: Low pressure shop or service air lines.
- Union connector (hose mender)
- Size 1/2" hose i.d.
$79.60
$7.96
$7.96
IMPORT PUSH TO CONNECT, DOT BRASS UNION TEE 1/4" TUBE
X264PMTX4-I
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Union tee connector
$76.5215
$15.3043
$15.3043
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 5/8" TUBE X 1/2" MALE PIPE
X269PMTNSX10X8
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non-swivel
$172.969
$34.5938
$34.5938
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 1/4" TUBE X 1/8" MALE PIPE
X269PMTNSX4X2
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
- Size 1/4" tubing o.d., 1/8" male pipe
$58.185
$11.637
$11.637
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 1/4" TUBE X 3/8" MALE PIPE
X269PMTNSX4X6
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non-swivel
$86.58
$17.316
$17.316
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, NON SWIVEL, 5/32" TUBE X 1/8" MALE PIPE
X269PMTNSX532X2
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non-swivel
$66.16
$13.232
$13.232
PUSH TO CONNECT, DOT BRASS MALE 90 DEGREE ELBOW, SWIVEL, 5/8" TUBE X 1/2" MALE PIPE
X269PMTX10X8
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools requir
- There are no nuts or sleeves used in their application.
- 90° male elbow, swivel
- 5/8" tube to 1/2" male pipe
$226.625
$45.325
$45.325
Refine