Pins
COTTER PIN - STAINLESS 1/8" X 1-1/4"
18X114SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 1/8 inch
- Length is 1-1/4 inches
$16.14
$0.3228
$0.3228
COTTER PIN - ZINC 1/8" X 1-3/4"
18X134CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 1-3/4 inches
$42.13
$0.4213
$0.4213
COTTER PIN - STAINLESS 1/8" X 1-1/2"
18X112SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 1/8 inch
- Length is 1-1/2 inches
$22.40
$0.448
$0.448
COTTER PIN - ZINC 1/8" X 1"
18X1CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 1 inch
$35.64
$0.3564
$0.3564
COTTER PIN - ZINC 1/8" X 1-1/2"
18X112CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 1-1/2 inches
$37.17
$0.3717
$0.3717
COTTER PIN - ZINC 1/8" X 1-1/4"
18X114CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 1-1/4 inches
$33.72
$0.3372
$0.3372
COTTER PIN - STAINLESS 1/8" X 1"
18X1SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 1/8 inch
- Length is 1 inch
$16.20
$0.324
$0.324
COTTER PIN - STAINLESS 1/8" X 2-1/2"
18X212SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 1/8 inch
- Length is 2-1/2 inches
$36.96
$0.7392
$0.7392
COTTER PIN - ZINC 1/8" X 2"
18X2CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 2 inches
$41.22
$0.4122
$0.4122
COTTER PIN - STAINLESS 1/8" X 2"
18X2SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 1/8 inch
- Length is 2 inches
$23.20
$0.464
$0.464
COTTER PIN - ZINC 1/8" X 3/4"
18X34CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 3/4 inch
$28.08
$0.2808
$0.2808
COTTER PIN - ZINC 1/8" X 3"
18X3CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 3 inches
$40.24
$0.4024
$0.4024
ROLL PIN - PLAIN FINISH 3/32" X 1"
3321RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 1 inch
$23.85
$0.2385
$0.2385
ROLL PIN - PLAIN FINISH 3/32" X 1-1/2"
332112RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 1-1/2 inches
$26.70
$0.267
$0.267
ROLL PIN - PLAIN FINISH 3/32" X 1/2"
33212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 1/2 inch
$16.65
$0.1665
$0.1665
ROLL PIN - PLAIN FINISH 3/32" X 3/4"
33234RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 3/4 inch
$19.80
$0.198
$0.198
ROLL PIN - PLAIN FINISH 3/32" X 3/8"
33238RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/32
- Length is 3/8 inch
$19.40
$0.194
$0.194
COTTER PIN - STAINLESS 3/32" X 1-1/2"
332X112SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 1-1/2 inches
$24.00
$0.24
$0.24
COTTER PIN - ZINC 3/32" X 1-1/4"
332X114CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 1-1/4 inches
$31.44
$0.3144
$0.3144
COTTER PIN - STAINLESS 3/32" X 1-1/4"
332X114SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 1-1/4 inches
$29.52
$0.2952
$0.2952
COTTER PIN - ZINC 3/32" X 1-3/4"
332X134CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 1-3/4 inches
$29.28
$0.2928
$0.2928
COTTER PIN - STAINLESS 3/32" X 1/2"
332X12SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 1/2 inch
$24.72
$0.2472
$0.2472
COTTER PIN - ZINC 3/32" X 1"
332X1CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 1 inch
$27.60
$0.276
$0.276
COTTER PIN - STAINLESS 3/32" X 1"
332X1SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 1 inch
$23.40
$0.234
$0.234
COTTER PIN - ZINC 3/32" X 2-1/2"
332X212CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 2-1/2 inches
$49.20
$0.492
$0.492