Pins
COTTER PIN - STAINLESS 3/32" X 2"
332X2SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 2 inches
$40.00
$0.40
$0.40
COTTER PIN - STAINLESS 3/32" X 3/4"
332X34SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/32 inch
- Length is 3/4 inch
$24.00
$0.24
$0.24
COTTER PIN - ZINC 3/32" X 3/4"
332X34CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 3/4 inch
$29.40
$0.294
$0.294
COTTER PIN - ZINC 3/32" X 2"
332X2CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 2 inches
$38.17
$0.3817
$0.3817
ROLL PIN - PLAIN FINISH 3/16" X 1-1/4"
36114RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 1-1/4 inches
$17.985
$0.3597
$0.3597
ROLL PIN - PLAIN FINISH 3/16" X 1-1/2"
36112RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 1-1/2 inches
$21.12
$0.4224
$0.4224
CLEVIS PIN - ADJUSTABLE PLAIN 3/16" DIA. 1-1/2" LONG
36112ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 3/16".
- Length: 1-1/2".
$7.98
$0.798
$0.798
ROLL PIN - PLAIN FINISH 3/16" X 1/2"
3612RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 1/2 inch
$13.875
$0.2775
$0.2775
ROLL PIN - PLAIN FINISH 3/16" X 2-1/2"
36212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 2-1/2 inches
$27.28
$0.5456
$0.5456
ROLL PIN - PLAIN FINISH 3/16" X 1"
361RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 1 inch
$16.26
$0.3252
$0.3252
CLEVIS PIN - ADJUSTABLE PLAIN 3/16" DIA. 2" LONG
362ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 3/16".
- Length: 2".
$10.752
$1.0752
$1.0752
ROLL PIN - PLAIN FINISH 3/16" X 2"
362RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 2 inches
$20.72
$0.4144
$0.4144
ROLL PIN - PLAIN FINISH 3/16" X 3/4"
3634RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/16
- Length is 3/4 inch
$15.445
$0.3089
$0.3089
COTTER PIN - STAINLESS 3/16" X 1-1/2"
36X112SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/16 inch
- Length is 1-1/2 inches
$18.00
$0.72
$0.72
COTTER PIN - ZINC 3/16" X 1-1/2"
36X112CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/16 inch
- Length is 1-1/2 inches
$23.96
$0.4792
$0.4792
COTTER PIN - ZINC 3/16" X 2-1/2"
36X212CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/16 inch
- Length is 2-1/2 inches
$30.08
$0.6016
$0.6016
COTTER PIN - ZINC 3/16" X 1"
36X1CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/16 inch
- Length is 1 inch
$20.80
$0.416
$0.416
COTTER PIN - ZINC 3/16" X 2"
36X2CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/16 inch
- Length is 2 inches
$24.60
$0.492
$0.492
COTTER PIN - STAINLESS 3/16" X 2-1/2"
36X212SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/16 inch
- Length is 2-1/2 inches
$27.9475
$1.1179
$1.1179
COTTER PIN - STAINLESS 3/16" X 2"
36X2SSCP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Stainless steel material
- Diameter is 3/16 inch
- Length is 2 inches
$22.295
$0.8918
$0.8918
COTTER PIN - ZINC 3/16" X 3"
36X3CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/16 inch
- Length is 3 inches
$33.88
$0.6776
$0.6776
CLEVIS PIN - ADJUSTABLE PLAIN 3/8" DIA. 1-1/2" LONG
38112ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 3/8".
- Length: 1-1/2".
$13.461
$1.3461
$1.3461
ROLL PIN - PLAIN FINISH 3/8" X 1-1/2"
38112RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/8
- Length is 1-1/2 inches
$20.7375
$0.8295
$0.8295
CLEVIS PIN - ADJUSTABLE PLAIN 3/8" DIA. 1" LONG
381ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 3/8".
- Length: 1".
$21.71
$2.171
$2.171
ROLL PIN - PLAIN FINISH 3/8" X 1"
381RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/8
- Length is 1 inch
$18.4825
$0.7393
$0.7393