Pins
CLEVIS PIN - ADJUSTABLE PLAIN 3/8" DIA. 2-1/2" LONG
38212ACP
- A quick replacement pin
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 3/8".
- Length: 2-1/2".
$19.799
$1.9799
$1.9799
ROLL PIN - PLAIN FINISH 3/8" X 2-1/2"
38212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/8
- Length is 2-1/2 inches
$33.355
$1.3342
$1.3342
CLEVIS PIN - ADJUSTABLE PLAIN 3/8" DIA. 2" LONG
382ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 3/8".
- Length: 2".
$23.296
$2.3296
$2.3296
ROLL PIN - PLAIN FINISH 3/8" X 2"
382RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/8
- Length is 2 inches
$32.2275
$1.2891
$1.2891
CLEVIS PIN - ADJUSTABLE PLAIN 3/8" DIA. 3" LONG
383ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 3/8".
- Length: 3".
$20.501
$2.0501
$2.0501
ROLL PIN - PLAIN FINISH 3/8" X 3"
383RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 3/8
- Length is 3 inches
$36.855
$1.4742
$1.4742
COTTER PIN - ZINC 3/8" X 3"
38X3CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/8 inch
- Length is 3 inches
$44.4925
$1.7797
$1.7797
COTTER PIN - ZINC 3/8" X 4"
38X4CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/8 inch
- Length is 4 inches
$57.6725
$2.3069
$2.3069
COTTER PIN - ZINC 3/8" X 5"
38X5CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/8 inch
- Length is 5 inches
$72.785
$2.9114
$2.9114
HITCH PIN - ZINC .093 DIAMETER, 1-5/8" LENGTH
HP203
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.093.
- Length of 1-5/8 inches.
$10.28
$0.4112
$0.4112
HITCH PIN - ZINC .177 DIAMETER, 3-1/4 LENGTH
HP206
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-1/4 inches.
$33.7425
$1.3497
$1.3497
HITCH PIN - ZINC .093 DIAMETER, 2-5/16" LENGTH
HP207
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.093.
- Length of 2-5/16 inches.
$11.40
$0.456
$0.456
HITCH PIN - ZINC .177 DIAMETER, 3-3/4 LENGTH
HP208
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.177.
- Length of 3-3/4 inches.
$34.335
$1.3734
$1.3734
HITCH PIN - ZINC .08 DIAMETER, 1-3/16 LENGTH
HP213
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.08.
- Length of 1-3/16 inches.
$17.055
$0.3411
$0.3411
HITCH PIN - ZINC .125 DIAMETER, 1-15/16" LENGTH
HP216
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.125.
- Length of 1-15/16 inches.
$13.86
$0.5544
$0.5544
HITCH PIN - ZINC .148 DIAMETER, 3-5/16 LENGTH
HP209
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.148.
- Length of 3-5/16 inches.
$22.3825
$0.8953
$0.8953
HITCH PIN - ZINC .243 DIAMETER, 4 LENGTH
HP219
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.243.
- Length of 4 inches.
$25.896
$2.5896
$2.5896
HITCH PIN - ZINC .062 DIAMETER, 1-5/16 LENGTH
HP222
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-5/16 inches.
$17.34
$0.3468
$0.3468
HITCH PIN - ZINC .042 DIAMETER, 1 LENGTH
HP223
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.042.
- Length of 1 inches.
$17.56
$0.3512
$0.3512
HITCH PIN - ZINC .125 DIAMETER, 2-1/2" LENGTH
HP227
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.125.
- Length of 2-1/2 inches.
$19.26
$0.7704
$0.7704
ROLL PIN - PLAIN FINISH 1/8" X 5/8"
X1858RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/8
- Length is 5/8 inch
$23.40
$0.234
$0.234
ROLL PIN - PLAIN FINISH 5/32" X 1-1/2"
532112RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 1-1/2 inches
$17.04
$0.3408
$0.3408
ROLL PIN - PLAIN FINISH 5/32" X 1-1/4"
532114RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 1-1/4 inches
$14.70
$0.294
$0.294
ROLL PIN - PLAIN FINISH 5/32" X 1/2"
53212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 5/32
- Length is 1/2 inch
$13.275
$0.2655
$0.2655