Brass Fittings
SAE 45 DEGREE FLARE MALE CONNECTOR 1/4" TUBE X 1/8" MALE PIPE
X48X4
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 1/4" tube, 1/8" male pipe
$13.9425
$2.7885
$2.7885
SAE 45 DEGREE FLARE MALE CONNECTOR 1/4" TUBE X 1/4" MALE PIPE
X48X4X4
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 1/4" tube, 1/4" male pipe
$20.64
$4.128
$4.128
SAE 45 DEGREE FLARE MALE CONNECTOR 5/16" TUBE X 1/8" MALE PIPE
X48X5
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 5/16" tube, 1/8" male pipe
$21.216
$4.2432
$4.2432
SAE 45 DEGREE FLARE MALE CONNECTOR 5/16" TUBE X 1/4" MALE PIPE
X48X5X4
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 5/16" tube, 1/4" male pipe
$45.50
$9.10
$9.10
SAE 45 DEGREE FLARE MALE CONNECTOR 3/8" TUBE X 1/4" MALE PIPE
X48X6
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 3/8" tube, 1/4" male pipe
$25.254
$5.0508
$5.0508
SAE 45 DEGREE FLARE MALE CONNECTOR 3/8" TUBE X 3/8" MALE PIPE
X48X6X6
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 3/8" tube, 3/8" male pipe
$29.22
$5.844
$5.844
SAE 45 DEGREE FLARE MALE CONNECTOR 1/2" TUBE X 3/8" MALE PIPE
X48X8
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 1/2" tube, 3/8" male pipe
$39.10
$7.82
$7.82
SAE 45 DEGREE FLARE MALE CONNECTOR 1/2" TUBE X 1/4" MALE PIPE
X48X8X4
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 1/2" tube, 1/4" male pipe
$39.5615
$7.9123
$7.9123
SAE 45 DEGREE FLARE MALE CONNECTOR 1/2" TUBE X 1/2" MALE PIPE
X48X8X8
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 1/2" tube, 1/2" male pipe
$56.70
$11.34
$11.34
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 5/8" TUBE X 1/2" MALE PIPE
X49X10
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 5/8" tube, 1/2" male pipe
$82.4715
$16.4943
$16.4943
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 1/8" TUBE X 1/8" MALE PIPE
X49X2
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 1/8" tube, 1/8" male pipe
$72.2075
$14.4415
$14.4415
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 1/4" TUBE X 1/8" MALE PIPE
X49X4
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 1/4" tube, 1/8" male pipe
$41.20
$8.24
$8.24
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 1/4" TUBE X 3/8" MALE PIPE
X49X4X6
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 1/4" tube, 3/8" male pipe
$48.0925
$9.6185
$9.6185
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 3/8" TUBE X 1/4" MALE PIPE
X49X6
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 3/8" tube, 1/4" male pipe
$64.0125
$12.8025
$12.8025
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 3/8" TUBE X 1/8" MALE PIPE
X49X6X2
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 3/8" tube, 1/8" male pipe
$55.80
$11.16
$11.16
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 3/8" TUBE X 3/8" MALE PIPE
X49X6X6
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 3/8" tube, 3/8" male pipe
$45.175
$9.035
$9.035
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 1/2" TUBE X 3/8" MALE PIPE
X49X8
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 1/2" tube, 3/8" male pipe
$56.52
$11.304
$11.304
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 1/2" TUBE X 1/4" MALE PIPE
X49X8X4
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 1/2" tube, 1/4" male pipe
$63.225
$12.645
$12.645
SAE 45 DEGREE FLARE, 90 DEGREE MALE CONNECTOR 1/2" TUBE X 1/2" MALE PIPE
X49X8X8
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- 90° male elbow
- Size 1/2" tube, 1/2" male pipe
$56.2725
$11.2545
$11.2545
AIR BRAKE NUT 3/8"
ABN38
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$37.125
$7.425
$7.425
AIR BRAKE SLEEVE 1/2"
ABS12
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$36.281
$7.2562
$7.2562
AIR BRAKE SLEEVE 3/8"
ABS38
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$19.80
$3.96
$3.96
AIR BRAKE ASSEMBLY UNION 1/2" HOSE
ABU12
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$193.375
$38.675
$38.675
AIR BRAKE ASSEMBLY UNION 3/8" HOSE
ABU38
- Air brake hose connections.
- Easy to assemble and disassemble.
- Meets DOT FMVSS571.106 standards when used with SAE J1402 air brake hose.
- Working pressure up to 225 PSI.
- Temperature range: -50° F to +212° F.
$125.4375
$25.0875
$25.0875
Refine