Brass Fittings
BRASS PIPE TEE 1/4" FEMALE X 1/4" FEMALE X 1/4" FEMALE
X3700X4
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Tee (3 way female pipe)
- Size 1/4" female pipe, 1/4" female pipe, 1/4" female pipe
$47.425
$9.485
$9.485
BRASS PIPE TEE 3/4" FEMALE X 3/4" FEMALE X 3/4" FEMALE, BLOCK STYLE ONLY
X3700X12BS
$181.3175
$36.2635
$36.2635
BRASS PIPE TEE 3/8" FEMALE X 3/8" FEMALE X 3/8" FEMALE
X3700X6
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Tee (3 way female pipe)
- Size 3/8" female pipe, 3/8" female pipe, 3/8" female pipe
$66.9375
$13.3875
$13.3875
BRASS PIPE STREET TEE 1/8" FEMALE X 1/8" FEMALE X 1/8" MALE
X3750X2
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Male run tee (female pipe on one end and center, male pipe on one end)
- Size 1/8" female pipe, 1/8" female pipe, 1/8" male pipe
$30.4425
$6.0885
$6.0885
BRASS PIPE STREET TEE 1/2" FEMALE X 1/2" FEMALE X 1/2" MALE
X3750X8
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Male run tee (female pipe on one end and center, male pipe on one end)
- Size 1/2" female pipe, 1/2" female pipe, 1/2" male pipe
$105.8625
$21.1725
$21.1725
BRASS PIPE STREET TEE 1/4" FEMALE X 1/4" FEMALE X 1/4" MALE
X3750X4
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Male run tee (female pipe on one end and center, male pipe on one end)
- Size 1/4" female pipe, 1/4" female pipe, 1/4" male pipe
$58.41
$11.682
$11.682
BRASS PIPE CROSS 1/4" FEMALE
X3950X4
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Cross (4 way connector, all female pipe thread)
- Size 1/4" female pipe
$80.34
$16.068
$16.068
BRASS PIPE CROSS 3/8" FEMALE
X3950X6
- Pipe brass fitting
- The most common form of brass fittings.
- They are used with brass, bronze, and iron pipe.
- Applications include grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems.
- There are no nuts or sleeves used.
- The fitting has threads referred to as National Pipe Threads (NPT).
- Cross (4 way connector, all female pipe thread)
- Size 3/8" female pipe
$97.76
$19.552
$19.552
BRASS 90 DEGREE ELBOW 3/16" TUBE X 1/8" PIPE, INVERT-FLARE
X402X3
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- 90° male elbow
- Size 3/16" tubing o.d., 1/8" male pipe
$49.25
$9.85
$9.85
BRASS 90 DEGREE ELBOW 1/4" TUBE X 1/8" PIPE, INVERT-FLARE
X402X4
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- 90° male elbow
- Size 1/4" tubing o.d., 1/8" male pipe
$21.72
$4.344
$4.344
BRASS 90 DEGREE ELBOW 1/4" TUBE X 1/4" PIPE, INVERT-FLARE
X402X4X4
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- 90° male elbow
- Size 1/4" tubing o.d., 1/4" male pipe
$40.7825
$8.1565
$8.1565
BRASS 90 DEGREE ELBOW 5/16" TUBE X 1/8" PIPE, INVERT-FLARE
X402X5
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- 90° male elbow
- Size 5/16" tubing o.d., 1/8" male pipe
$40.5775
$8.1155
$8.1155
BRASS 90 DEGREE ELBOW 5/16" TUBE X 1/4" PIPE, INVERT-FLARE
X402X5X4
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- 90° male elbow
- Size 5/16" tubing o.d., 1/4" male pipe
$65.655
$13.131
$13.131
BRASS 90 DEGREE ELBOW 3/8" TUBE X 1/4" PIPE, INVERT-FLARE
X402X6
- Inverted flare fitting
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- 90° male elbow
- Size 3/8" tubing o.d., 1/4" male pipe
$75.31
$15.062
$15.062
SAE 45 DEGREE FLARE LONG NUT 1/4"
X41X4
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Long nut
- Size 1/4" tube
$59.62
$5.962
$5.962
SAE 45 DEGREE FLARE LONG NUT 1/2"
X41X8
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Long nut
- Size 1/2" tube
$75.50
$7.55
$7.55
SAE 45 DEGREE FLARE BRASS UNION 1/8"
X42X2
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/8" tube
$21.60
$4.32
$4.32
SAE 45 DEGREE FLARE BRASS UNION 1/4"
X42X4
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/4" tube
$34.4575
$6.8915
$6.8915
SAE 45 DEGREE FLARE BRASS UNION 3/8"
X42X6
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 3/8" tube
$34.43
$6.886
$6.886
SAE 45 DEGREE FLARE BRASS UNION 1/2"
X42X8
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/2" tube
$62.505
$12.501
$12.501
SAE 45 DEGREE FLARE MALE CONNECTOR 5/8" TUBE X 1/2" MALE PIPE
X48X10
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 5/8" tube, 1/2" male pipe
$80.08
$16.016
$16.016
SAE 45 DEGREE FLARE MALE CONNECTOR 1/8" TUBE X 1/8" MALE PIPE
X48X2
- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Male connector
- Size 1/8" tube, 1/8" male pipe
$24.00
$4.80
$4.80
Refine