Washers
FLAT WASHER USS 316 STAINLESS #8
XFW8SS316
- Used to improve stress distribution, and to span large holes
- USS PATTERN
- 316 Stainless
$14.00
$0.14
$0.14
FENDER WASHER STAINLESS 1/4" X 1-1/2"
X14X112FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
$91.56
$0.9156
$0.9156
FENDER WASHER STAINLESS 1/4" X 1-1/4"
X14X114FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1-1/4"
$46.32
$0.4632
$0.4632
FENDER WASHER STAINLESS 1/4" X 1"
X14X1FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1"
$46.90
$0.469
$0.469
FLAT WASHER USS STAINLESS #8
FW8SS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
$10.00
$0.10
$0.10
FLAT WASHER SAE ZINC 1/4"
SFW14
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 5/8"
- Inside Diameter: 9/32"
$13.60
$0.136
$0.136
FENDER WASHER STAINLESS 3/16" X 3/4"
X36X34FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
$33.00
$0.33
$0.33
FLAT WASHER USS ZINC 3/8" THRU HARDENED
8FW38
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 1"
- Inside Diameter: 7/16"
$33.84
$0.3384
$0.3384
FLAT WASHER METRIC ZINC M5
FW5M
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 5.3 Max 5.48
- Outside Diameter: Min 9.64 Max 10
$4.80
$0.048
$0.048
FLAT WASHER USS STAINLESS 3/8"
FW38SS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
- Outside Diameter: 1"
- Inside Diameter: 7/16"
$24.00
$0.24
$0.24
FLAT WASHER USS ZINC 3/8"
FW38
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 1"
- Inside Diameter: 7/16"
$29.25
$0.2925
$0.2925
LOCK WASHER SPLIT USS ZINC 1/4" GR 5
LW14
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Resists loosening caused by vibration and corrosion.
- Designed for use with grade 5 bolts.
- Rockwell Hardness: C38-46
- Inside Diameter: Min .252 Max .260
- Outside Diameter: 0.487
$22.35
$0.2235
$0.2235
FLAT WASHER USS STAINLESS 1/4"
FW14SS
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
- Outside Diameter: 3/4"
- Inside Diameter: 5/16"
$18.15
$0.1815
$0.1815
FENDER WASHER USS ZINC 1/2" X 2"
12X2FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/2"
- Outside Diameter: 2"
$61.60
$0.616
$0.616
FENDER WASHER ZINC HEAVY DUTY 1/2" X 2"
12X2FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/2"
- Outside Diameter: 2"
$283.47
$2.8347
$2.8347
FENDER WASHER USS ZINC 1/4" X 1"
14X1FW
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1"
$28.95
$0.2895
$0.2895
FENDER WASHER ZINC HEAVY DUTY 1/4" X 1" X 1/8" THICK
14X1FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1"
$95.34
$0.9534
$0.9534
FLAT WASHER USS ZINC 1/4" THRU HARDENED
8FW14
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 3/4"
- Inside Diameter: 5/16"
$23.55
$0.2355
$0.2355
FLAT WASHER USS ZINC 3/4" THRU HARDENED
8FW34
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 2"
- Inside Diameter: 13/16"
$24.01
$0.9604
$0.9604
FLAT WASHER USS ZINC 5/8" THRU HARDENED
8FW58
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from heat treated thru-hardened steel, zinc yellow.
- Outside Diameter: 1-3/4"
- Inside Diameter: 11/16"
$35.18
$0.7035
$0.7035