Switches
POLLAK TOGGLE SWITCH ON-OFF-ON 3 BLADES
XP34-218
- On-off-on
- SPDT
- 3 screw terminals
- Rated 50 amps
- 6-24 Volts
$30.75
POLLAK TOGGLE SWITCH MOM(ON) OFF
XP34-570
- Standard duty toggle switch.
- Single pole, single throw.
- Circuitry: Momentary On-Off.
- Standard bat handle, chrome.
- Two screw terminals.
- Rated for 20 amps at 12 volts DC.
$21.8078
POLLAK TOGGLE SWITCH
XP34-212
- Heavy duty toggle switch.
- Single pole, single throw.
- Circuitry: On-Off.
- Standard 1" duckbill handle, chrome.
- Two screw terminals.
- Rated up to 50 amps, 12 volts.
$16.698
POLLAK TOGGLE SWITCH MOM(ON) OFF MOM(ON) 6 SCREWS
XP34-580
- Standard duty toggle switch.
- Double pole, double throw.
- Circuitry: Momentary On-Off-Momentary On.
- Standard bat handle, chrome.
- Six screw terminals.
- Rated for 20 amps at 12 volts DC.
$12.465
POLLAK TOGGLE SWITCH MOM(ON) OFF MOM(ON) 6 BLADES
XP34-580Q
- Momentary on-Off-Momentary on
- DPDT
- 6 quick disconnect terminals
- Rated 20 amps, 12 Volts DC
$12.195
TOGGLE SWITCH MOM ON-OFF-MOM O 4 BLADES, LONG HANDLE
XP34-591LQ
- Standard duty toggle switch.
- Double pole, double throw.
- Circuitry: Momentary On-Off-Momentary On, Reversing.
- Long, 1-1/2" bat handle, chrome.
- Four 1/4" blade terminals.
- Rated for 20 amps at 12 volts DC.
$46.8461
POLLAK TOGGLE SWITCH
XP34-591Q
- Standard duty toggle switch.
- Double pole, double throw.
- Circuitry: Momentary On-Off-Momentary On, Reversing.
- Standard bat handle, chrome.
- Four 1/4" blade terminals.
- Rated for 20 amps at 12 volts DC.
$38.177
POLLAK TOGGLE SWITCH ON OFF ON NYLON BAT
XP34-588Q
- Standard duty toggle switch
- Single Pole, Double Throw
- Five 1/4" blade terminals
- Rated for 20 amps at 12 volts DC
- Lighted version has transparent Lexan handle
$17.8296
POLLAK TOGGLE SWITCH ON-OFF
XP34-586Q
- Standard duty toggle switch
- SIngle Pole, Single Throw
- Four 1/4? blade terminals
- Rated for 20 amps at 12 volts DC
- Lighted version has transparent Lexan handle
- On/Off
$32.0194
POLLAK MASTER DISCONNECT SWITCH WATERPROOF
XP51-902
- Lever operated
- Rated 6-36 Volts DC
- 180 Amps continuous
- 1000 Amps in rush
- SPST
$85.4191
POLLAK PUSH-PULL SWITCH
XP35-306
- Push-pull switch.
- For 6-28 Volt DC applications.
- 75 amp DC rated.
- Single pole, single throw.
- Die cast body.
- Mounting stem: 15/32" diameter, 5/8" long.
- Two screw terminals.
$32.9423
SEALED PLUNGER SWITCH
XP52-624
- On-off
- Sealed plunger switch and mating connector
- Rated 10 amps at 14 Volts DC
- Self adjusting
- Mating connector has three 8" 18 gauge wire leads
$29.8845
ROCKER SWITCH ROUND BLACK BODY, RED LED INDICATOR
XRA21ADC2RL
- Rated 20 amps at 14 volts DC
- SPST
- .187" terminal width
- OFF-ON
- Red LED dot.
$668.53
$6.6853
$6.6853
CARLING CONTURA SWITCH BODY (ON)-OFF-(ON) UNLIT
XVDD1S00B
- Rocker Switch
- Double Pole Double Throw
- 20 amp
- 12VDC
- Easy installation: actuators snap onto switch body
- 6 Contacts
$194.14
$19.4138
$19.4138
CARLING MOUNTING PANEL END
XVME-01
- Mounting Bracket end
- Dimensions: 1.19" W x 2.30" H
- End unit reverses to fit either side of the middle unit
- For use with the Contura Rocker Switches
$53.98
$5.3976
$5.3976
CARLING SINGLE MOUNTING PANEL
XVMM-01
- Mounting Bracket Center
- Dimensions: 1.34" W x 2.03" H
- Mounting hole: 1.03" W x 1.97" H
- For use with the Contura Rocker Switches
- Used where multiple switches can be installed with only one hold to cut in your panel
- Black
$57.27
$5.727
$5.727
CARLING CONTURA II SWITCH ACTUATOR BLACK SOFT RED LENS
XVVARB00-000
- Aesthetic design of raised "bumps" on the top and bottom of the rocker
- Fits the Contura switch bodies
- Easy installation: actuators snap onto switch body
- Constructed of thermoplastic polycarbonate
$7.2028
PUSH-PULL SWITCH, OFF/ON, TWO 12" WIRES, 6-36 VOLTS DC
XCHM-606
- Brass housing, plasticized.
- Two insulated copper wire leads, 12" long.
- Chrome-plated brass knob.
- 10-32 thread.
$68.64
TOGGLE SWITCH - ON/OFF 2 SCREWS, SPST
TS571
- Heavy duty toggle switches.
- Ideal for industrial controls, marine panels, trucks, buses and automotive applications.
- The frame and supports are made from zinc plated steel.
- Has a black phenolic base.
- Recommended mounting hole is .500" diameter.
- Circuitry: On-Off
- Single pole, single throw.
- Ratings: 20 amps @ 125VAC and 21 amps @ 14VDC.
- Two screw terminals.
$38.25
$7.65
$7.65