Screws
BLACK SHEET METAL SCREW SQ DR PAN HD #8 X 1/2"
X8X12RH2
- Sheet Metal Screw
- Square Drive
- Pan Head
- Black
- #8 x 1/2"
$19.20
$0.192
$0.192
SHEET METAL SCREW RND WASHER #8 X 1/2", ZINC, PHILLIPS
X8X12RWS
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$12.00
$0.12
$0.12
TEK SCREW RND WASHER HD PHILLIPS #8 X 1/2"
X8X12RWT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1/2"
$13.80
$0.138
$0.138
SHEET METAL SCREW RND WASHER #8 X 1/2", BLACK, PHILLIPS
X8X12RWS2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- The design has the finished appearance of a conventional round head plus washer.
- Originally created to provide extra large bearing surface under the head.
- Design allows for it to be used as a trim screw.
- Round Washer Phillips Head
- Black zinc finish
- Screw diameter: 8
- Screw length 1/2 inch
$45.60
$0.456
$0.456
SHEET METAL SCREW RND WASHER #8 X 1-3/4", QUAD DRIVE, BRONZE
X8X134RWHQBZ
- ROUND WASHER HEAD
- PHILLIPS DRIVE
- #8 DIAMETER
- LENGTH 1-3/4"
- BRONZE FINISH
$29.76
$0.2976
$0.2976
METAL SCREW PAN HEAD PHILLIPS #8 X 1/4" BLACK
X8X14P2
- PAN HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
$62.24
$0.6224
$0.6224
TEK SCREW RND WASHER HD PHILLIPS #8 X 1-5/8"
X8X158RWT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-5/8"
$73.20
$0.732
$0.732
METAL SCREW PHILLIPS FLAT HEAD #8 X 1"
X8X1FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1 inch
$22.50
$0.225
$0.225
SHEET METAL SCREW PHIL FLAT HD #8 X 1" STAINLESS
X8X1FHPS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- #8-32 X 1"
$24.00
$0.24
$0.24
TEK SCREW FLAT HEAD PHILLIPS #8 X 1"
X8X1FHPT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Flat head phillips head.
- Steel zinc plated.
$64.56
$0.6456
$0.6456
METAL SCREW SQ DRIVE FLAT HEAD #8 X 1"
X8X1FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1 inch
$16.80
$0.168
$0.168
TEK SCREW PHILLIPS PAN HEAD #8 X 1", STAINLESS
X8X1PTS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Stainless Steel
$34.44
$0.3444
$0.3444
SHEET METAL SCREW SQ DR PAN HD #8 X 1"
X8X1RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 1 inch
$17.85
$0.1785
$0.1785
SHEET METAL SCREW RND WASHER PAN HD #8 X 1", QUAD DRIVE, BRONZE
X8X1RWHQBZ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head quad drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Stat bronze plated steel
$28.05
$0.2805
$0.2805
PHIL.RND.WSHR.HD.SMS (ZINC) PHILLIPS ZINC
X8X1RWS
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- The design has the finished appearance of a conventional round head plus washer.
- Originally created to provide extra large bearing surface under the head.
- Design allows for it to be used as a trim screw.
- Steel zinc plated.
- Diameter: 8
- Length: 1"
$16.80
$0.168
$0.168
TEK SCREW RND WASHER HD PHILLIPS #8 X 1"
X8X1RWT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1"
$20.85
$0.2085
$0.2085
Refine
6 More
2 More