Screws
METAL SCREW PHILLIPS PAN HEAD #8 X 3/4" BLACK
X8X34P2
- PAN HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
$41.14
$0.4114
$0.4114
TEK SCREW PHILLIPS PAN HEAD #8 X 3/4", STAINLESS
X8X34PTS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Stainless Steel
- Rockwell hardness C55 minimum.
- Diameter: 8
- Length: 3/4"
$37.51
$0.3751
$0.3751
SHEET METAL SCREW SQ DR PAN HD #8 X 3/4"
X8X34RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 3/4 inch
$19.05
$0.1905
$0.1905
TEK SCREW SQUARE DRIVE PAN HD ZINC #8 X 3/4"
X8X34RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 3/4"
$24.90
$0.249
$0.249
SHEET METAL SCREW RND WASHER PAN HD #8 X 3/4", QUAD DRIVE, BRONZE
X8X34RWHQBZ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head quad drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Stat bronze plated steel
$21.60
$0.216
$0.216
SHEET METAL SCREW RND WASHER #8 X3/4", ZINC, PHILLIPS
X8X34RWS
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$14.00
$0.14
$0.14
SHEET METAL SCREW RND WASHER #8 X 3/4", BLACK, PHILLIPS
X8X34RWS2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- The design has the finished appearance of a conventional round head plus washer.
- Originally created to provide extra large bearing surface under the head.
- Design allows for it to be used as a trim screw.
- Round Washer Phillips Head
- Black zinc finish
- Screw diameter: 8
- Screw length 3/4 inch
$17.40
$0.174
$0.174
TEK SCREW RND WASHER HD PHILLIPS #8 X 3/4"
X8X34RWT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 3/4"
$16.80
$0.168
$0.168
TEK SCREW PHILLIPS PAN HEAD #8 X 3/8"
X8X38PT
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel zinc plated
$12.60
$0.126
$0.126
DRYWALL SCREW - FINE #8 X 3"
X8X3DW
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 8
- Length 3 inches
- Bugle head, phillips drive
$24.00
$0.24
$0.24
SHEET METAL SCREW SQ DR FLAT HD #8 X 3"
X8X3FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 3 inches
$31.80
$0.318
$0.318
SHEET METAL SCREW SQ DR PAN HEAD #8 X 3"
X8X3RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 3 inches
$124.53
$1.2453
$1.2453
SHEET METAL SCREW RND WASHER PAN HD #8 X3", QUAD DRIVE, BRONZE
X8X3RWHQBZ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head quad drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Stat bronze plated steel
$190.45
$1.9045
$1.9045
SHEET METAL SCREW RND WASHER #8 X 9/16", ZINC, PHILLIPS
X8X96RWS
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- The design has the finished appearance of a conventional round head plus washer.
- Originally created to provide extra large bearing surface under the head.
- Design allows for it to be used as a trim screw.
- Steel zinc plated.
- Diameter: 8
- Length: 9/16"
$13.80
$0.138
$0.138
Refine
6 More
2 More