Screws
METAL SCREW SQ DRIVE FLAT HEAD #8 X 1-1/4"
X8X114FHSD
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1-1/4 inches
$42.35
$0.4235
$0.4235
TEK SCREW PHILLIPS PAN HEAD #8 X 1-1/4"
X8X114PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-1/4"
$19.35
$0.1935
$0.1935
SHEET METAL SCREW SQ DR PAN HD #8 X 1-1/4"
X8X114RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 1-1/4 inches
$27.30
$0.273
$0.273
TEK SCREW SQUARE DRIVE PAN HD #8 X 1-1/4"
X8X114RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-1/4"
$45.04
$0.4504
$0.4504
SHEET METAL SCREW RND WASHER PAN HD #8 X 1-1/4", QUAD DRIVE, BRONZE
X8X114RWHQBZ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head quad drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Stat bronze plated steel
$48.48
$0.4848
$0.4848
TEK SCREW PHILLIPS PAN HEAD #8 X 1-1/4" BLACK
X8X114PT2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel Black Oxide
$71.20
$0.712
$0.712
SHEET METAL SCREW RND WASHER #8 X 1-1/4", BLACK, PHILLIPS
X8X114RWS2
- For self starting in thin metal or resin-filled plywood.
- The design has the finished appearance of a conventional round head plus washer.
- Originally created to provide extra large bearing surface under the head.
- Design allows for it to be used as a trim screw.
- Round Washer Phillips Head
- Black zinc finish
- Screw diameter: 8
- Screw length 1-1/4 inches
$19.20
$0.192
$0.192
TEK SCREW RND WASHER HD PHILLIPS #8 X 1-1/4"
X8X114RWT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-1/4"
$21.00
$0.21
$0.21
TEK SCREW RND WASHER HD PHILLIPS #8 X 1-1/4" BLACK
X8X114RWT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Round washer head, phillips drive.
- Steel zinc black.
- Diameter: 8
- Length: 1-1/4"
$18.60
$0.186
$0.186
METAL SCREW PHILLIPS FLAT HEAD #8 X 1/2"
X8X12FHP
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 8
- Screw length 1/2 inch
$11.80
$0.118
$0.118
METAL SCREW PHILLIPS PAN HEAD #8 X 1/2" BLACK
X8X12P2
- PAN HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
$40.59
$0.4059
$0.4059
SHEET METAL SCREW SQ DR PAN HD #8 X 1/2"
X8X12RH
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 8
- Screw length is 1/2 inch
$16.95
$0.1695
$0.1695
SS TEK SCREW PHILLIPS PAN HEAD #8 X 1/2"
X8X12PTS
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Stainless Steel
$40.00
$0.40
$0.40
TEK SCREW SQUARE DRIVE PAN HD #8 X 1/2"
X8X12RHT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1/2"
$15.75
$0.1575
$0.1575
Refine
6 More
2 More