Washers
FLAT WASHER NYLON #10
XFW10NY
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from nylon.
$41.47
$0.4147
$0.4147
FLAT WASHER METRIC ZINC M6 CL10
XFW6M10
- Used to improve stress distribution, and to span large holes.
- For use with class 8.8 and 10.9 screws and studs.
- Steel, zinc plated.
- Inside Diameter: Min 6.4 Max 6.62
- Outside Diameter: Min 11.57 Max 12
$29.28
$0.2928
$0.2928
FLAT WASHER METRIC ZINC M5 CL10
XFW5M10
- Used to improve stress distribution, and to span large holes.
- For use with class 8.8 and 10.9 screws and studs.
- Steel, zinc plated.
- Inside Diameter: Min 5.3 Max 5.48
- Outside Diameter: Min 9.64 Max 10
$25.08
$0.2508
$0.2508
LOCK WASHER INTERNAL STAINLESS #10 INTERNAL TOOTHED
XILW10SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from stainless steel.
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .394 Max .410
$30.00
$0.30
$0.30
LOCK WASHER INTERNAL STAINLESS #6 INTERNAL TOOTHED
XILW6SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Made from stainless steel.
- Inside Diameter: Min .221 Max .231
- Outside Diameter: Min .394 Max .410
$106.00
$0.106
$0.106
LOCK WASHER INTERNAL STAINLESS 3/8" INTERNAL TOOTHED
XILW38SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Stainless Steel
- Inside Diameter: Min .384 Max .398
- Outside Diameter: Min .670 Max .692
- Thickness: Min .032 Max .040
$33.60
$0.336
$0.336
LOCK WASHER INTERNAL STAINLESS #8 INTERNAL TOOTHED
XILW8SS
- A hardened circular washer with twisted prongs or teeth which extend inward from the inside edge of the washer.
- This style is preferred when finished appearance is crucial and the teeth must be hidden under the head of the screw
- Stainless Steel
- Inside Diameter: Min.168 Max .176
- Outside Diameter: Min .325 Max .340
- Thickness: Min .018 Max .023
$8.60
$0.086
$0.086
LOCKWASHER SPLIT METRIC PLAIN , M10
XLW10MPL
- A coiled, hardened split circular washer with a slightly trapezoidal wire section.
- Applies greater bolt tension per unit of applied torque.
- Provides a hardened bearing surface and more uniform load distribution.
- Steel, plain finish
- Resists loosening caused by vibration and corrosion.
$34.10
$0.341
$0.341
FENDER WASHER ZINC HEAVY DUTY 5/16" X 1-1/2"
56X112FWHD
- A flat washer with more surface area than a USS or SAE washer.
- Made from heavier gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 5/16"
- Outside Diameter: 1-1/2"
$164.52
$1.6452
$1.6452
FENDER WASHER STAINLESS 5/16" X 1"
X56X1FWSS
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
$43.10
$0.431
$0.431
AUVECO NYLON 1/4" FLAT WASHERS 100/BOX
XA13899
- NYLON FLAT WASHER 1/4 BOLT .281 ID .030 THICK
- Inner Diameter : 0.266-0.296"
- Outer Diameter : 0.485-0.515"
- Thickness : 0.029-0.031"
- Material : Natural Nylon
$54.985
FLAT WASHER USS STAINLESS #10 1000/BAG
FW10SS-M
- Used to improve stress distribution, and to span large holes
- USS PATTERN
- Used where parts are subject to corrosion
- Made from 18-8 stainless steel
- Case Quantity: 1,000
$178.00
$0.178
$0.178
FLAT WASHER BONDED SEALING 1/4" STAINLESS
XBSW14SS
- Neoprene Bonded Washer
- 18-8 Stainless
- Outside Diameter: 3/4"
$42.13
$0.4213
$0.4213
FLAT WASHER METRIC ZINC M20 CL10
XFW20M10
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: M21
- Outside Diameter: M37
$32.29
$1.2915
$1.2915