Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
ROLL PIN - PLAIN FINISH 1/2" X 2"
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/2
- Length is 2 inchs
$1.6081
HEX CAP SCREW UNC STAINLESS 1/2"-13 X 3" FULL THREAD
- Grade 18-8 stainless steel hex cap screws.
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications.
- Tensile strength: 100,000 psi. minimum.
- Unified screw threads :UNC.
- Diameter: 1/2"-13.
$3.042
HEX CAP SCREW UNC STAINLESS 1/2"-13" X 3-1/2" FULL THREAD
- Hex Cap Screw
- Full Thread
- Flat Head
- 18-8 Stainless Steel
$3.357
HEX CAP SCREW UNC STAINLESS 1/2"-13" X 4"
- Hex Cap Screw
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications
- Tensile strength: 100,000 psi. minimum
- 18-8 Stainless Steel
- Diameter: 1/2"-13
- Length: 4"
$4.32
HEX CAP SCREW UNC STAINLESS 1/2"-13" X 5"
- Hex Cap Screw
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications
- Tensile strength: 100,000 psi. minimum
- 18-8 Stainless Steel
- Diameter: 1/2"-13
- Length: 5"
$4.0437
HEX CAP SCREW UNC STAINLESS 1/2"-13" X 6"
- Hex Cap Screw
- Used in products that require general atmospheric corrosion resistance such as chemical and food processing equipment and marine applications
- Tensile strength: 100,000 psi. minimum
- 18-8 Stainless Steel
- Diameter: 1/2"-13
- Length: 6"
$4.4505
SOCKET HEX PIPE PLUG 1/2" PIPE PLAIN
- Alloy hex pipe plug.
- Hex socket drive.
- ASME/ANSI B1.20.3-1976.
- Length 3/4"
$4.8252
HEX CAP SCREW BOLT METRIC ZINC M12-1.50 X 25 CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric fine threads.
- Diameter: M12-1.50.
- Length: 25 mm.
$0.802
HEX CAP SCREW BOLT METRIC ZINC M12-1.50 X 30 CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric fine threads.
- Diameter: M12-1.50.
- Length: 30 mm.
$0.8895
HEX CAP SCREW BOLT METRIC ZINC M12-1.50 X 35 CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric fine threads.
- Diameter: M12-1.50.
- Length: 35 mm.
$0.8505
HEX CAP SCREW BOLT METRIC ZINC M12-1.50 X 40 CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric fine threads.
- Diameter: M12-1.50.
- Length: 40 mm.
$0.9742
HEX CAP SCREW BOLT METRIC ZINC M12-1.75 X 100, CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
$2.5601