Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
SHEET METAL SCREW PHIL FLAT HD #10 X 3/4" STAINLESS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 10 X 3/4"
$0.2055
METAL SCREW SQ DRIVE FLAT HEAD #10 X 3/4"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Square drive increases productivity with excellent torque transmission and resists cam-out
- Flat head, square drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 3/4 inch
$0.19
METAL SCREW PAN HEAD PHILLIPS #10 X 3/4" BLACK OXIDE
- Sheet Metal Screw
- Phillips Drive
- Pan Head
- Black Oxide
- #10 x 3/4"
$0.42
TEK SCREW PHILLIPS PAN HEAD #10 X 3/4", STAINLESS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Stainless Steel
- Rockwell hardness C55 minimum.
- Diameter: 10
- Length: 3/4"
$0.40
SHEET METAL SCREW SQ DR PAN HD #10 X 3/4"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 3/4"
$0.249
TEK SCREW SQUARE DRIVE PAN HD #10 X 3/4"
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 3/4"
$0.165
TEK SCREW HEX WASHER HD #10 X 3/4", STAINLESS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Grade 410 Stainless
$0.396
HEX CAP SCREW BOLT METRIC ZINC M10-1.50 X 35 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M10-1.50.
- Length: 35 mm.
$0.6335
SHEET METAL SCREW SQ DR PAN HD #10 X 3"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- For general applications.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 10
- Length: 3"
$0.3982
SOCKET HEAD CAPSCREW STAINLESS M10-1.50 X 40
- Stainless Steel
- Metric Socket Head Capscrew
- M10 X 1.50 Thread
- 40 mm long
$1.2303
HEX CAP SCREW BOLT METRIC ZINC M10-1.50 X 45 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M10-1.50.
- Length: 45 mm.
$0.9605
DRYWALL SCREW - FINE #10 X 4"
- A bugle head screw with spaced threads, extra sharp point and black phosphate finish.
- Used to attach drywall to woods studs or 25 gauge metal studs.
- Heat treated steel material.
- Minimum Rockwell C 44 hardness.
- Screw diameter: 10
- Length 4 inches
- Bugle head, phillips drive
$0.4224
HEX CAP SCREW BOLT METRIC ZINC M10-1.50 X 50 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M10-1.50.
- Length: 50 mm.
$0.907