Fasteners

Industrial Fasteners for Construction, Fabrication & Maintenance

Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.

Bolts, Screws & Threaded Rod

Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.

Nuts, Washers & Locking Hardware

Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.

Anchors & Threaded Inserts

Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.

Pins, Retaining Rings & Rivets

For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.

Specialty Fasteners & Hardware

Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.

Value Propositions

Broad selection of standard and metric fasteners for every application
Suitable for industrial, fleet, and maintenance use
Structural, mechanical, and anchoring solutions for diverse environments
Consistent sizing for efficient repair and replacement
Supports fabrication, installation, and equipment service

Display items per page

HEX NUT STAINLESS UNC 1/2"-13

SSN1213

A finished hex nut made from stainless steel.
For use with grade stainless steel cap screws.
Proof load: 100,000 psi.
Corrosion resistant 18-8 stainless steel alloy.
Size: 1/2"-13.

$28.92
$0.5784

+ -

HEX NUT STAINLESS UNC #12-24

SSN1224

A finished hex nut made from stainless steel.
For use with grade stainless steel screws.
Proof load: 100,000 psi.
Corrosion resistant 18-8 stainless steel alloy.
Size: #12-24.

$25.20
$0.252

+ -

HEX NUT STAINLESS UNC 3/8"-16

SSN3816

A finished hex nut made from stainless steel.
For use with grade stainless steel cap screws.
Proof load: 100,000 psi.
Corrosion resistant 18-8 stainless steel alloy.
Size: 3/8"-16.

$41.90
$0.419

+ -

HEX NUT STAINLESS UNC 7/16"-14

SSN7614

A finished hex nut made from stainless steel.
For use with grade stainless steel cap screws.
Proof load: 100,000 psi.
Corrosion resistant 18-8 stainless steel alloy.
Size: 7/16"-14.

$24.50
$0.49

+ -

HEX NUT STAINLESS UNC #6-32

SSN632

A finished hex nut made from stainless steel.
For use with grade stainless steel screws.
Proof load: 100,000 psi.
Corrosion resistant 18-8 stainless steel alloy.
Size: #6-32.

$22.50
$0.225

+ -

THREADED INSERT NUT UNC ALUM #10-24 THICKNESS 3/32

TINA1024

Aluminum threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$68.415
$1.3683

+ -

THREADED INSERT NUT UNC ALUM 1/4"-20 THICKNESS 3/32

TINA1420

Aluminum threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$68.575
$2.743

+ -

THREADED INSERT NUT UNC ALUM 3/8"-16 THICKNESS 3/32

TINA3816

Aluminum threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$28.646
$2.8646

+ -

THREADED INSERT NUT UNC ALUM 5/16"-18 THICKNESS 3/32

TINA5618

Aluminum threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$70.915
$2.8366

+ -

THREADED INSERT NUT UNC ALUM #6-32 THICKNESS 3/32

TINA632

Aluminum threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$59.01
$1.1802

+ -

THREADED INSERT NUT UNC ALUM #8-32 THICKNESS 3/32

TINA832

Aluminum threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$59.01
$1.1802

+ -

THREADED INSERT NUT UNC STEEL 1/4"-20 THICKNESS 3/32

TINS1420

Steel threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$45.4025
$1.8161

+ -

THREADED INSERT NUT UNC STEEL #10-24 THICKNESS 3/32

TINS1024

Steel threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$68.90
$1.378

+ -

THREADED INSERT NUT UNF STEEL #10-32 THICKNESS 3/32

TINS1032

Steel threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$68.90
$1.378

+ -

THREADED INSERT NUT UNC STEEL 3/8"-16 THICKNESS 3/32

TINS3816

Steel threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$33.048
$3.3048

+ -

THREADED INSERT NUT UNC STEEL #6-32 THICKNESS 3/32

TINS632

Steel threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$54.985
$1.0997

+ -

THREADED INSERT NUT UNC STEEL 5/16"-18 THICKNESS 3/32

TINS5618

Steel threaded inserts.
Use in any thickness of metal or rigid material of at least 3/32".
Eliminates the need for tapping, welding and brazing.
During installation the base is drawn upwards inside the upper sleeve forcing 360° contact between the sleeve and application material.

$32.2175
$1.2887

+ -

ACORN NUT STAINLESS #10-24

X1024ANSS

A low-crown cap nut usually made from two pieces.
Serves two main purposes: as decoration or cover for projecting threads.
Stainless.
10-24 thread.

$56.80
$0.568

+ -

MACHINE SCREW PHIL PAN HD #10-24 X 1-1/2" STAINLESS

X1024X112PSS

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
Used in food processing machinery and refrigeration equipment.
Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
Made from 18-8 stainless
Pan head Phillips.
10-24 diameter.
Length of 1-1/2".

$44.88
$0.4488

+ -

MACHINE SCREW PHIL FLAT HD #10-24 X 1-1/2" STAINLESS

X1024X112FHPS

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
Used in food processing machinery and refrigeration equipment.
Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.

$41.92
$0.4192

+ -

SOCKET HEAD CAPSCREW UNC PLAIN #10-24 X 1-1/2"

X1024X112SHC

Made from alloy steel.
Cylindrical head with a flat chamfered top surface.
Knurled cylindrical sides and hexagonal recess.
Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance.
Supplies greater tensile strength than equivalent sizes of grade 5 and grade 8 hex cap screws while requiring less surface area or counterbore since the fastener is internally wrenched.
Plain black finish.
Diameter: #10-24
Length: 1-1/2"

$32.78
$0.3278

+ -

MACHINE SCREW PHIL FLAT HD #10-24 X 1-1/4" STAINLESS

X1024X114FHPS

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
Used in food processing machinery and refrigeration equipment.
Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.

$42.88
$0.4288

+ -

MACHINE SCREW PHIL PAN HD #10-24 X 1-1/4" STAINLESS

X1024X114PSS

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
Used in food processing machinery and refrigeration equipment.
Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
Made from 18-8 stainless
Pan head Phillips.
10-24 diameter.
Length of 1-1/4".

$64.72
$0.6472

+ -

SOCKET HEAD CAPSCREW UNC PLAIN #10-24 X 1-1/4"

X1024X114SHC

Made from alloy steel.
Cylindrical head with a flat chamfered top surface.
Knurled cylindrical sides and hexagonal recess.
Ideal for precision assembly work with close tolerances, and applications needing a well tooled appearance.
Supplies greater tensile strength than equivalent sizes of grade 5 and grade 8 hex cap screws while requiring less surface area or counterbore since the fastener is internally wrenched.
Plain black finish.
Diameter: #10-24
Length: 1-1/4"

$20.00
$0.20

+ -