Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
FENDER WASHER ZINC HEAVY DUTY 3/8" X 1-3/4" .108 THICK
- Flat washer with more surface area than a USS or SAE washer
- Made from heavier gauge metal than most flat washers
- Used where an extra wide bearing surface is required
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel
- Inside diameter 3/8"
- Outside diameter 1-1/2"
METRIC MACH. SCREW PHILLIPS PAN HD M8-1.25 X 40
- Metric Machine Screw Phillips Pan Head
- M8-1.25 Thread
- 40 MM length
SS TEK SCREW PHILLIPS PAN HEAD #6 X 1/2"
- #6 X 1/2"
- Stainless steel Phillips pan head tek screw
ROLL PIN - PLAIN FINISH 5/64" X 3/4"
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation
- Used as locking devices, positioning points, anti-chafing surfaces, shaft or sleeves for wiring
- Carbon steel, plain finish material
- Diameter is 5/16"
- Length is 4-3/4"
FLAT WASHER SAE ZINC 1"
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 2"
- Inside Diameter: 1-1/16"
$1.3286
FLAT WASHER SAE ZINC #10
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 1/2"
- Inside Diameter: 7/32"
$0.104
FLAT WASHER SAE ZINC 1/4"
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 5/8"
- Inside Diameter: 9/32"
$0.136
FLAT WASHER SAE ZINC #12
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 9/16"
- Inside Diameter: 1/4"
$0.3949
FLAT WASHER SAE ZINC 3/8"
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 13/16"
- Inside Diameter: 13/32"
$0.168
FLAT WASHER SAE ZINC #4
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 5/16"
- Inside Diameter: 1/8"
$0.022
FLAT WASHER SAE ZINC 1/2"
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 1-1/16"
- Inside Diameter: 17/32"
$0.252
FLAT WASHER SAE ZINC 5/16"
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 11/16"
- Inside Diameter: 11/32"
$0.184
FLAT WASHER SAE ZINC 5/8"
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 1-5/16"
- Inside Diameter: 21/32"
$0.4136
FLAT WASHER SAE ZINC #6
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 3/8"
- Inside Diameter: 5/32"
$0.192
FLAT WASHER SAE ZINC 7/16"
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 59/64"
- Inside Diameter: 15/32"
$0.2925
FLAT WASHER SAE ZINC 7/8"
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 1-3/4"
- Inside Diameter: 15/16"
$1.1459
FLAT WASHER SAE ZINC #8
- Used to improve stress distribution, and to span large holes.
- SAE PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 7/16"
- Inside Diameter: 3/16"
$0.204