Steel Fittings
STEEL TUBE NUT INVERTED FLARE 3/16"
X105X3
- Manufactured from zinc plated steel.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- For use with 3/16" o.d. tubing.
- Thread size is 3/8-24.
$13.93
$1.393
$1.393
STEEL TUBE NUT INVERTED FLARE 1/4"
X105X4
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- For use with 1/4" o.d. tubing.
- Thread size is 7/16-24.
$9.926
$0.9926
$0.9926
STEEL TUBE NUT INVERTED FLARE 5/16"
X105X5
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- For use with 5/16" o.d. tubing.
- Thread size is 1/2-20.
$14.95
$1.495
$1.495
STEEL TUBE NUT INVERTED FLARE 3/8"
X105X6
- Manufactured from either CA360 or CA345 brass.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The seat on this style of fitting is inverted to resist mechanical pullout.
- The tube end will have an inverted cone on the inside.
- For use with 3/8" o.d. tubing.
- Thread size is 5/8-18.
$26.52
$2.652
$2.652
STEEL FITTING O-RING FACE SEAL CAP 5/8" SAE
X4129X10
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 5/8" o.d. tubing.
- Thread size is 1"-14.
$16.8088
STEEL FITTING O-RING FACE SEAL CAP 3/4" SAE
X4129X12
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 3/4" o.d. tubing.
- Thread size is 1-3/16"-12.
$16.1415
STEEL FITTING O-RING FACE SEAL CAP 1" SAE
X4129X16
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1" o.d. tubing.
- Thread size is 1-7/16"-12.
$17.972
STEEL FITTING O-RING FACE SEAL CAP 1/2" SAE
X4129X8
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1/2" o.d. tubing.
- Thread size is 13/16"-16.
$12.7845
STEEL FITTING O-RING FACE SEAL PLUG 5/8" SAE
X4229X10
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 5/8" o.d. tubing.
- Thread size is 1"-14.
$12.8925
STEEL FITTING O-RING FACE SEAL PLUG 3/4" SAE
X4229X12
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 3/4" o.d. tubing.
- Thread size is 1-3/16"-12.
$14.9048
STEEL FITTING O-RING FACE SEAL PLUG 1" SAE
X4229X16
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1" o.d. tubing.
- Thread size is 1-7/16"-12.
$27.2175
STEEL FITTING O-RING FACE SEAL PLUG 3/8" SAE
X4229X6
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 3/8" o.d. tubing.
- Thread size is 11/16"-16.
$6.8805
STEEL FITTING O-RING FACE SEAL PLUG 1/2" SAE
X4229X8
- Seal-lok steel fittings.
- Very effective in wide range of applications where higher pressures, vibration and impulse are prevalent.
- Meet or exceed SAE J1453 and ISO 8434-3.
- Sealing method: o ring
- For use with 1/2" o.d. tubing.
- Thread size is 13/16"-16.
$10.2915
STEEL PIPE CAP 5/8" TUBE, JIC 37 FLARE
XC5129X10
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets specifications SAE J514 and ISO 8434-2.
- For use with 5/8" o.d. tubing.
- Thread size is 7/8"-14.
$7.436
STEEL PIPE CAP 3/4" TUBE, JIC 37 FLARE
XC5129X12
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets specifications SAE J514 and ISO 8434-2.
- For use with 3/4" o.d. tubing.
- Thread size is 1-1/16"-12.
$8.2445
STEEL PIPE CAP 1" TUBE, JIC 37 FLARE
XC5129X16
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets specifications SAE J514 and ISO 8434-2.
- For use with 1" o.d. tubing.
- Thread size is 1-5/16"-12.
$11.8215
STEEL PIPE CAP 1/4" TUBE, JIC 37 FLARE
XC5129X4
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets specifications SAE J514 and ISO 8434-2.
- For use with 1/4" o.d. tubing.
- Thread size is 7/16"-20.
$3.864
STEEL PIPE CAP 5/16" TUBE, JIC 37 FLARE
XC5129X5
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets specifications SAE J514 and ISO 8434-2.
- For use with 5/16" o.d. tubing.
- Thread size is 1/2"-20.
$3.522
STEEL PIPE CAP 3/8" TUBE, JIC 37 FLARE
XC5129X6
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets specifications SAE J514 and ISO 8434-2.
- For use with 3/8" o.d. tubing.
- Thread size is 9/16"-18.
$4.728
STEEL PIPE CAP 1/2" TUBE, JIC 37 FLARE
XC5129X8
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets specifications SAE J514 and ISO 8434-2.
- For use with 1/2" o.d. tubing.
- Thread size is 3/4"-16.
$4.356
STEEL PIPE PLUG 5/8" TUBE, JIC 37 FLARE
XC5229X10
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets of SAE J514 and ISO 8434-2.
- For use with 5/8" o.d. tubing.
- Thread size is 7/8"-14.
$7.70
STEEL PIPE PLUG 3/4" TUBE, JIC 37 FLARE
XC5229X12
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets of SAE J514 and ISO 8434-2.
- For use with 3/4" o.d tubing.
- Thread size is 1-1/16"-12.
$9.81
STEEL PIPE PLUG 1" TUBE, JIC 37 FLARE
XC5229X16
- JIC / 37° flare steel fittings.
- Useful in virtually every application that uses fluid power for motion control.
- Meets of SAE J514 and ISO 8434-2.
- For use with 1" o.d. tubing.
- Thread size is 1-5/16"-12.
$13.392