Screws
MACHINE SCREW PHILLIPS PAN HD #12-24 X 3/8"
1224X38
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
- Zinc plated steel.
- 12-24 diameter.
- Length of 3/8".
$16.35
$0.1635
$0.1635
WOOD SCREW PHILLIPS FLAT HEAD #12 X 1-1/2"
12X112FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 12
- Length: 1-1/2"
$31.44
$0.3144
$0.3144
SHEET METAL SCREW HEX WASH HD #12 X 1-1/2"
12X112H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 1-1/2 inches
$32.16
$0.3216
$0.3216
SHEET METAL SCREW OVAL PHIL HD #12 X 1-1/2" STAINLESS
12X112OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 12
- Screw length 1-1/2 inches
$38.17
$0.3817
$0.3817
SHEET METAL SCREW PHIL PAN HD #12 X 1-1/2"
12X112P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 1-1/2"
$30.48
$0.3048
$0.3048
SHEET METAL SCREW PHIL PAN HD #12 X 1-1/2" STAINLESS
12X112PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 12
- Screw length 1-1/2 inches
$69.60
$0.696
$0.696
TEK SCREW HEX WASHER HD #12 X 1-1/2"
12X112T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 12
- Length: 1-1/2"
$27.00
$0.27
$0.27
WOOD SCREW PHILLIPS FLAT HEAD #12 X 1-1/4"
12X114FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 12
- Length: 1-1/4"
$29.40
$0.294
$0.294
SHEET METAL SCREW HEX WASH HD #12 X 1-1/4"
12X114H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 1-1/4 inches
$25.20
$0.252
$0.252
SHEET METAL SCREW PHIL PAN HD #12 X 1-1/4"
12X114P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 1-1/4"
$24.72
$0.2472
$0.2472
SHEET METAL SCREW OVAL PHIL HD #12 X 1-1/4" STAINLESS
12X114OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 12
- Screw length 1-1/4 inches
$33.55
$0.3355
$0.3355
SHEET METAL SCREW HEX WASH HD #12 X 1/2"
12X12H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 1/2 inch
$24.60
$0.246
$0.246
SHEET METAL SCREW PHIL PAN HD #12 X 1/2"
12X12P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 1/2"
$26.76
$0.2676
$0.2676
WOOD SCREW PHILLIPS FLAT HEAD #12 X 1"
12X1FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 12
- Length: 1"
$25.20
$0.252
$0.252
SHEET METAL SCREW HEX WASH HD #12 X 1"
12X1H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 1 inch
$28.20
$0.282
$0.282
SHEET METAL SCREW OVAL PHIL HD #12 X 1" STAINLESS
12X1OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 12
- Screw length 1 inch
$49.50
$0.495
$0.495
SHEET METAL SCREW PHIL PAN HD #12 X 1"
12X1P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 1"
$28.65
$0.2865
$0.2865
SHEET METAL SCREW PHIL PAN HD #12 X 1" STAINLESS
12X1PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 12
- Screw length 1 inch
$52.00
$0.52
$0.52
TEK SCREW HEX WASHER HD #12 X 1"
12X1T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 12
- Length: 1"
$29.85
$0.2985
$0.2985
SHEET METAL SCREW HEX WASH HD #12 X 2"
12X2H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 2 inches
$35.42
$0.3542
$0.3542
SHEET METAL SCREW PHIL PAN HD #12 X 2" STAINLESS
12X2PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 12
- Screw length 2 inches
$50.56
$0.5056
$0.5056
SHEET METAL SCREW PHIL PAN HD #12 X 2"
12X2P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 12
- Length: 2"
$40.59
$0.4059
$0.4059
TEK SCREW HEX WASHER HD #12 X 2"
12X2T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 12
- Length: 2"
$33.48
$0.3348
$0.3348
SHEET METAL SCREW HEX WASH HD #12 X 3/4"
12X34H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 12
- Screw length 3/4 inch
$25.65
$0.2565
$0.2565
SHEET METAL SCREW OVAL PHIL HD #12 X 3/4" STAINLESS
12X34OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 12
- Screw length 3/4 inch
$42.88
$0.4288
$0.4288
Refine
6 More
2 More