Screws
TEK SCREW HEX WASHER HD #8 X 1-1/4"
8X114T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1-1/4"
$17.55
$0.1755
$0.1755
SHEET METAL SCREW HEX WASH HD #8 X 1/2"
8X12H
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 8
- Screw length 1/2 inch
$14.00
$0.14
$0.14
SHEET METAL SCREW QUAD DR PAN HD #8 X 1-1/4" WHITE
8X114RH3
- A thread forming tapping screw with spaced threads and a gimlet point.
- Can be substituted in most applications for round, truss or binding screws.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a round top surface, cylindrical sides and a flat bearing surface.
- Zinc plated steel, with heads painted white.
- Great for RV applications.
- Square drive
- Screw diameter 8
- Screw length is 1-1/4 inches
$24.12
$0.2412
$0.2412
SHEET METAL SCREW OVAL PHIL HD #8 X 1/2" STAINLESS
8X12OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 1/2 inch
$16.65
$0.1665
$0.1665
SHEET METAL SCREW PHIL PAN HD #8 X 1/2"
8X12P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 1/2"
$12.40
$0.124
$0.124
SHEET METAL SCREW PHIL PAN HD #8 X 1/2" STAINLESS
8X12PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 8
- Screw length 1/2 inch
$29.85
$0.2985
$0.2985
TEK SCREW PHILLIPS PAN HEAD #8 X 1/2"
8X12PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1/2"
$15.20
$0.152
$0.152
TEK SCREW PHILLIPS PAN HEAD #8 X 1/2" , BLACK
8X12PT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Phillips pan head.
- Steel zinc black.
- Diameter: 8
- Length: 1/2"
$35.52
$0.3552
$0.3552
TEK SCRW QUAD-DRIVE PAN HD #8 X 1/2" WHITE
8X12RHT3
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Zinc plated steel with white painted heads.
- Diameter: 8
- Length: 1/2"
$29.88
$0.2988
$0.2988
TEK SCRW QUAD-DRIVE PAN HD #8 X 1/2" BLACK
8X12RHT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
$26.40
$0.264
$0.264
SHEET METAL SCREW QUAD DR PAN HD #8 X 1/2" TAN HEAD
8X12RH11
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$20.52
$0.2052
$0.2052
TEK SCREW QUAD DR PAN HD #8 X 1/2" TAN HEAD
8X12RHT11
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
$25.70
$0.257
$0.257
METAL SCREW QUAD DRIVE #8 X 1/2" ROUND WASHER HD
8X12RWHQ
- Sheet Metal Screw
- Square Drive
- Round Washer Head
- Type A
- Zinc
- #8 x 1/2"
$18.45
$0.1845
$0.1845
TEK SCREW HEX WASHER HD #8 X 1/2"
8X12T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1/2"
$17.80
$0.178
$0.178
SHEET METAL SCREW PHIL PAN HD #8 X 1/4"
8X14P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 1/4"
$38.28
$0.3828
$0.3828
TEK SCREW HEX WASHER HEAD #8 X 1/2" BLACK
8X12T2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Hex washer head
- Black oxide
$29.40
$0.294
$0.294
WOOD SCREW PHILLIPS FLAT HEAD #8 X 1"
8X1FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 8
- Length: 1"
$32.81
$0.3281
$0.3281
SHEET METAL SCREW HEX WASH HD #8 X 1"
8X1H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 8
- Screw length 1 inch
$26.70
$0.267
$0.267
SHEET METAL SCREW OVAL PHIL HD #8 X 1" STAINLESS
8X1OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 1 inch
$29.52
$0.2952
$0.2952
SHEET METAL SCREW PHIL PAN HD #8 X 1"
8X1P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 1"
$16.80
$0.168
$0.168
SHEET METAL SCREW PHIL PAN HD #8 X 1" STAINLESS
8X1PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 8
- Screw length 1 inch
$36.19
$0.3619
$0.3619
TEK SCREW PHILLIPS PAN HEAD #8 X 1"
8X1PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 1"
$17.80
$0.178
$0.178
TEK SCREW PHILLIPS PAN HEAD #8 X 1" , BLACK
8X1PT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Phillips pan head.
- Steel zinc black.
- Diameter: 8
- Length: 1"
$44.80
$0.448
$0.448
SHEET METAL SCREW QUAD DR PAN HD #8 X 1" TAN HEAD
8X1RH11
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$23.37
$0.2337
$0.2337
Refine
6 More
2 More