Pins
ROLL PIN - PLAIN FINISH 1/4" X 2-1/2"
14212RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 2-1/2 inches
$19.68
$0.7872
$0.7872
ROLL PIN - PLAIN FINISH 1/4" X 3/4"
1434RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 3/4 inch
$9.625
$0.385
$0.385
ROLL PIN - PLAIN FINISH 1/4" X 2"
142RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 2 inches
$15.96
$0.6384
$0.6384
COTTER PIN - ZINC 1/4" X 1-1/2"
14X112CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/4 inch
- Length is 1-1/2 inches
$16.24
$0.6496
$0.6496
COTTER PIN - ZINC 1/4" X 1"
14X1CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/4 inch
- Length is 1 inch
$13.04
$0.5216
$0.5216
COTTER PIN - ZINC 1/4" X 2-1/2"
14X212CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/4 inch
- Length is 2-1/2 inches
$22.1375
$0.8855
$0.8855
COTTER PIN - ZINC 1/4" X 2"
14X2CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/4 inch
- Length is 2 inches
$19.7275
$0.7891
$0.7891
COTTER PIN - ZINC 1/4" X 3"
14X3CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/4 inch
- Length is 3 inches
$26.00
$1.04
$1.04
COTTER PIN - ZINC 1/4" X 4"
14X4CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/4 inch
- Length is 4 inches
$27.0725
$1.0829
$1.0829
COTTER PIN - ZINC 1/4" X 5
14X5CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/4 inch
- Length is 5 inches
$33.355
$1.3342
$1.3342
ROLL PIN - PLAIN FINISH 5/64" X 3/4"
56434RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation
- Used as locking devices, positioning points, anti-chafing surfaces, shaft or sleeves for wiring
- Carbon steel, plain finish material
- Diameter is 5/16"
- Length is 4-3/4"
$0.2012
COTTER PIN - ZINC 1/8" X 2-1/2"
18X212CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 1/8 inch
- Length is 2-1/2 inches
$45.70
$0.457
$0.457
COTTER PIN - ZINC 3/32" X 1-1/2"
332X112CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 3/32 inch
- Length is 1-1/2 inches
$31.90
$0.319
$0.319
HITCH PIN - ZINC .062 DIAMETER, 1-9/16A" LENGTH
HP218
- Also known as bridge pins or hairpin cotter pins, these are the most common form of hitch pin retention.
- Steel, zinc plated.
- Used in conjunction with clevis pins and also trailer receivers.
- Wire diameter 0.062.
- Length of 1-9/16 inches.
$17.875
$0.3575
$0.3575
ROLL PIN - PLAIN FINISH 1/4" X 2-1/4"
X14214RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 2-1/4 inches
$38.025
$1.521
$1.521
ROLL PIN - PLAIN FINISH 1/4" X 3"
X143RP
- Standard single-turned pin with .a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 1/4
- Length is 3 inchs
$37.49
$1.4996
$1.4996
CLEVIS PIN - ADJUSTABLE PLAIN 5/16" DIA. 2-1/2" LONG
56212ACP
- A quick replacement pin.
- Feature a series of holes making it adaptable to varying lengths.
- Easily replaces bolts, cotter pins or rivets on all types of equipment.
- Use the diameter that fits your application and cut off the excess length.
- Plain finish.
- Diameter: 5/16".
- Length: 2-1/2".
$21.002
$2.1002
$2.1002
ROLL PIN - PLAIN FINISH 7/32" X 1-1/2"
732112RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 7/32
- Length is 1-1/2 inches
$20.40
$0.408
$0.408
COTTER PIN - ZINC 7/64" X 1"
764X1CP
- Metal, extended prong type cotter pin.
- Extended prong makes separating the tines easier.
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position.
- When used with castle or slotted nuts, it becomes a safety locking device.
- Low carbon steel, zinc plated material
- Diameter is 7/64 inch
- Length is 1 inch
$30.84
$0.3084
$0.3084
