Hand Tools
PRY BAR, 12-3/8," RIGHT ANGLE CLAW
XS55515
- 12-3/4" long
- Contoured bar for pulling nails, prying and lifting
- Forged, high-carbon steel for strength and durability
- Polished and beveled cutting edges
- Beveled nail slot at both ends
$23.457
LOOM INSTALLATION TOOL FOR 1/4
XW570
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 1/4".
$9.50
LOOM TOOL/ WIRE INSERTION FOR MAXIMUM DIAMETER OF 3/8"
XW571
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 3/8".
$7.1962
LOOM TOOL/ WIRE INSERTION FOR 1/2" TO 5/8"
XW572
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 1/2" and 5/8".
$11.044
LOOM TOOL/ WIRE INSERTION FOR MAXIMUM DIAMETER OF 3/4"
XW573
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 3/4".
$9.3944
LOOM TOOL/ WIRE INSERTION FOR MAXIMUM DIAMETER OF 1"
XW574
- Split loom insertion tool.
- Used to easily insert wire bundles in split loom wire coverings.
- For split loom size of 1".
$8.0628
KNIPEX UNIVERSAL PLIERS SET W/ COBRA PLIERS, 3 PIECES
UPCP3S
- 3-piece set with custom molded plastic tray included for easy tool storage
- 8" overall length - long nose pliers with cutter - flexible distortion-tolerant tips
- 8” overall length - high leverage 12 degree angled diagonal cutters – design makes cutting 20% easier
- 10” overall length - Cobra Water Pump Pliers – self-locking design means no slipping
$195.45
KNIPEX COBRA PLIERS SET 7", 10", 12" 3 PIECES
CP3S
- 3-piece set with custom molded plastic tray included for easy tool storage
- Perfect gripping pliers for every application
- Grip any shaped object – round, square, hex or flat with a bite like no other pliers
- Adjustment at the touch of a button
- Self-locking on pipes and nuts for a no-slip-grip with low hand force required
- Pinch guard prevents operators from being pinched
- Available lengths of 7-1/4”, 10”, & 12”
- Serrated gripping surface
$234.675
KNIPEX PLIERS/SCREWDRIVER TOOL SET, 1000V INSULATED, 5 PIECES
PST5S
- 5-piece set
- Insulated for 1000v
- 9-1/2" overall length - High Leverage Lineman's Pliers - design requires 50% less effort
- 10" overall length - High Leverage Diagonal Cutting Pliers - design requires 20% less effort
- 4" overall length - R2 square drive screwdriver - R2 square drive tip
- 5" overall length - 7/32" slotted screwdriver - 7/32" tip
- 4" overall length - Phillips screwdriver - P2 tip
$291.05
KNIPEX TWINGRIP PLIERS 8"
TGP8
- Front and side grips easily grip stripped screws and bolts
- Slim head design for working in confined spaces
- Pinch guard prevents operators from being pinched
- 8" overall length
- Grip range from 5/32" to 7/8" (4 to 22mm)
- 5 Adjustment positions
$64.675
KNIPEX CORE PLIERS SET IN TOOL ROLL, 5 PIECES
CPSTR5
- 5-piece set with tool roll
- 8” overall length - Forged wire stripper 20-10 AWG – strips both solid and stranded wire
- 10” overall length - High leverage diagonal cutters – design makes cutting 20% easier
- 8” overall length - TwinGrip pliers - front and side grips easily grip stripped screws and bolts
- 10” overall length - Black pliers wrench – replaces a full set of standard and metric open-end wrenches up to 2”
- 10” overall length - Cobra Water Pump Pliers – push-button adjustment – adjust once and it stays set
$481.825
KNIPEX EAR CLAMP PLIERS WITH FRONT & SIDE JAWS 8 3/4"
ECP834
- Simple and reliable mounting of 1-ear and 2-ear clamps (Oetiker system or similar)
- Slim head provides access to confined spaces
- Additional side jaw for easy 90 degree clamping where space is limited
- 8 – 3/4" overall length
$54.425
CABLE TIE TENSION TOOL 18-50 LB, MANUAL TWIST CUT
TRT
- Economical cable tie tool.
- Quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts and abrasions to cables, hoses, products and users.
- Is the most cost-effective for the occasional user.
- This lightweight and durable tool easily fits into narrow and tight spaces.
- Quickly tensions and cuts excess strap with a twist of the tool.
- Will cut 18, 40 and 50 lb. rated cable ties.
$29.425
KNIPEX RATCHETING KNIFE 5 3/4"
RK534
- Ratchet function enables stripping with less effort for a variety of large diameter cables
- Multi-functional blade featuring three cutting areas for round and longitudinal cuts
- Guide shoe prevents damaging conductor insulation under the cable jacket/insulation
- Strips hard or tough plastic jacket/insulation up to 1/4" thick
- Replaceable hook blade can be folded for transport and storage
- Three-stage lock for blade positioning
- 5-3/4" overall length
$159.75
CHUCK KEY - LARGE MASTER, 3/8"- 3/4"
MCKL
- Carbon steel master chuck key.
- Opens heavy duty chucks 3/8" to 3/4".
- The squared center of the key opens acetylene tanks.
- Made from carbon steel.
$30.525
CHUCK KEY - SMALL MASTER, 1/4"- 1/2"
MCKS
- Carbon steel master chuck key.
- Opens light duty 1/4" to 1/2" chucks.
- The squared center of the key opens acetylene tanks.
- Made from carbon steel.
$29.25
WELDING PLIERS WELPER STYLE
MIGPL
- 9" Mig welding pliers.
- Drop forged, heat treated.
- Heavy insulated grip for comfort and safety.
- Spring loaded handle.
- Wire cutter for trimming Mig wire.
$30.0025
RIVET AND NUT INSERT TOOL
PRNST
- 2 in 1 blind rivet and rivet nut tool.
- Has the utility to set both blind rivets and rivet nuts.
- This tool has the capability to set 1/4" structural blind rivets.
- The changeover from blind rivets to rivet nuts is simple and takes less than 1 minute.
- Patented fold away design makes it easy to carry and store.
- Forged steel arms insure durability while soft touched rubberized grips guarantee comfort.
- Stored in a blow molded carrying case.
- Blind Rivets: 1/8”, 5/32”, 3/16”, & 1/4”
- Rivet Nuts: #8-32, #10-32, 1/4”-20, 5/16”-18, 3/8”-16
$247.50
DEWALT 3 PK OSCILLATING SAW (FOR WOOD ONLY)
XDWAOS
- UNIVERAL FIT FOR USE ON ALL MAJOR BRANDS
- VARIETY OF BLADES
- FOR USE ON WOOD, PVC, OR METAL
$52.625
MILTON VALVE CORE TOOL
XM444
- Milton Industries valve core tool.
- For the easy removal and insertion of valve cores.
- One end is designed for large bore valve cores, and one end for standard valve cores.
$12.285
