Fasteners

Industrial Fasteners for Construction, Fabrication & Maintenance

Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.

Bolts, Screws & Threaded Rod

Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.

Nuts, Washers & Locking Hardware

Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.

Anchors & Threaded Inserts

Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.

Pins, Retaining Rings & Rivets

For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.

Specialty Fasteners & Hardware

Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.

Value Propositions

Broad selection of standard and metric fasteners for every application
Suitable for industrial, fleet, and maintenance use
Structural, mechanical, and anchoring solutions for diverse environments
Consistent sizing for efficient repair and replacement
Supports fabrication, installation, and equipment service

Display items per page

HEX CAP SCREW BOLT UNC ZINC 7/16"-14 X 6", GR 5

76X6C

Made from medium carbon steel.
Heat treated.
Tensile strength: 120,000 psi. minimum.
Zinc plated.
Unified screw threads :UNC.
Diameter: 7/16"-14.
Length: 6".

$55.14
$2.2054

+ -

HEX CAP SCREW BOLT UNC ZINC 7/16"-14 X 6", GR 8

76X6C8

Made from medium carbon alloy steel.
Heat treated.
Tensile strength: 150,000 psi. minimum.
Yellow zinc plated.
Unified screw threads :UNC.
Diameter: 7/16"-14.
Length: 6".

$106.48
$4.2593

+ -

TEK SCRW QUAD-DRIVE PAN HD #8 X 3/4" WHITE

8X34RHT3

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Round washer head, phillips drive.
Zinc plated steel with white painted heads.
Diameter: 8
Length: 3/4"

$24.90
$0.249

+ -

SHEET METAL SCREW RND WASHER #8 X 3/4", QUAD DRIVE

8X34RWHQ

A thread forming tapping screw with spaced threads and a gimlet point.
For self starting in thin metal or resin-filled plywood.
Round washer heads have a rounded top surface, cylindrical sides and a flat bearing surface.
Quad drives provide ability to use several driver bits.
Zinc plated steel.
Round washer head, quad drive
Screw diameter 8
Screw length 3/4 inch

$23.40
$0.234

+ -

TEK SCREW RND WASHER HD PHILLIPS #8 X 3/4" , BLACK

8X34RWT2

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Rockwell hardness C52-58.
Round washer head, phillips drive.
Steel zinc black.
Diameter: 8
Length: 3/4"

$19.80
$0.198

+ -

TEK SCREW HEX WASHER HD #8 X 3/4"

8X34T

A tapping screw with spaced threads and a drill point which drills its own hole.
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
Hex washer head.
Steel zinc plated.
Rockwell hardness C52 minimum.
Diameter: 8
Length: 3/4"

$15.30
$0.153

+ -

TEK SCREW HEX WASHER HEAD - BL #8 X 3/4"

8X34T2

A tapping screw with spaced threads and a drill point which drills its own hole
May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
Hex washer head
Black oxide

$24.48
$0.2448

+ -

HEX CAP SCREW BOLT METRIC ZINC M8-1.25 X 35, CL 8.8

8X35M

Hex head cap screw with metric thread pitch made from medium carbon steel.
Heat treated.
Tensile strength: 800 Newtons/mm² minimum.
Zinc plated.
Metric coarse threads.
Diameter: M8-1.25.
Length: 35 mm.

$19.86
$0.3971

+ -

MACHINE SCREW PHILLIPS PAN HD #10-24 X 1-1/4"

1024X114

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Made from AISI 1006-1022 or equivalent steel.
Pan head Phillips.
Zinc plated steel.
10-24 diameter.
Length of 1-1/4".

$28.20
$0.282

+ -

CUP-POINT SOCKET SET-SCREW #10-24 X 1/2"

102412CPS

A headless screw threaded the entire length.
It has a hex drive at one end and a cup-shaped indentation at the other end.
The cup point is the most used style set screw.
Rockwell hardness of C45-53.
Diameter: #10-24
Length: 1/2"

$32.64
$0.3264

+ -

CUP-POINT SOCKET SET-SCREW #10-24 X 1/4"

102414CPS

A headless screw threaded the entire length.
It has a hex drive at one end and a cup-shaped indentation at the other end.
The cup point is the most used style set screw.
Rockwell hardness of C45-53.
Diameter: #10-24
Length: 1/4"

$30.96
$0.3096

+ -

MACHINE SCREW PHIL OVAL HD #10-24 X 1-1/2" STAINLESS

1024X112OP

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
Used in food processing machinery and refrigeration equipment.
Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
Made from 18-8 stainless
Oval head Phillips.
10-24 diameter.
Length of 1-1/2".

$34.32
$0.3432

+ -

MACHINE SCREW PHILLIPS PAN HD #10-24 X 1-1/2"

1024X112

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Made from AISI 1006-1022 or equivalent steel.
Pan head Phillips.
Zinc plated steel.
10-24 diameter.
Length of 1-1/2".

$39.60
$0.396

+ -

MACHINE SCREW PHILLIPS PAN HD #10-24 X 1"

1024X1

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Made from AISI 1006-1022 or equivalent steel.
Pan head Phillips.
Zinc plated steel.
10-24 diameter.
Length of 1".

$21.60
$0.216

+ -

CUP-POINT SOCKET SET-SCREW #10-24 X 5/8"

102458CPS

A headless screw threaded the entire length.
It has a hex drive at one end and a cup-shaped indentation at the other end.
The cup point is the most used style set screw.
Rockwell hardness of C45-53.
Diameter: #10-24
Length: 5/8"

$36.74
$0.3674

+ -

CUP-POINT SOCKET SET-SCREW #10-24 X 3/8"

102438CPS

A headless screw threaded the entire length.
It has a hex drive at one end and a cup-shaped indentation at the other end.
The cup point is the most used style set screw.
Rockwell hardness of C45-53.
Diameter: #10-24
Length: 3/8"

$27.96
$0.2796

+ -

CUP-POINT SOCKET SET-SCREW #10-24 X 5/16"

102456CPS

A headless screw threaded the entire length.
It has a hex drive at one end and a cup-shaped indentation at the other end.
The cup point is the most used style set screw.
Rockwell hardness of C45-53.
Diameter: #10-24
Length: 5/16"

$31.32
$0.3132

+ -

CUP-POINT SOCKET SET-SCREW #10-32 X 3/4"

103234CPS

A headless screw threaded the entire length.
It has a hex drive at one end and a cup-shaped indentation at the other end.
The cup point is the most used style set screw.
Rockwell hardness of C45-53.
Diameter: #10-32
Length: 3/4"

$41.04
$0.4104

+ -

CUP-POINT SOCKET SET-SCREW #10-32 X 3/8"

103238CPS

A headless screw threaded the entire length.
It has a hex drive at one end and a cup-shaped indentation at the other end.
The cup point is the most used style set screw.
Rockwell hardness of C45-53.
Diameter: #10-32
Length: 3/8"

$26.40
$0.264

+ -

CUP-POINT SOCKET SET-SCREW #10-32 X 5/16"

103256CPS

A headless screw threaded the entire length.
It has a hex drive at one end and a cup-shaped indentation at the other end.
The cup point is the most used style set screw.
Rockwell hardness of C45-53.
Diameter: #10-32
Length: 5/16"

$46.80
$0.468

+ -

MACHINE SCREW PHILLIPS PAN HD #10-32 X 1-1/4"

1032X114

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Made from AISI 1006-1022 or equivalent steel.
Pan head Phillips.
Zinc plated steel.
10-32 diameter.
Length of 1-1/4".

$29.04
$0.2904

+ -

MACHINE SCREW PHIL OVAL HD #10-32 X 1-1/2" STAINLESS

1032X112OP

A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
Machine screws form a fastening superior in strength to spaced thread screws.
Stainless steel machine screws are used in applications which require general atmospheric corrosion resistance.
Used in food processing machinery and refrigeration equipment.
Stainless is also superior to steel in withstanding some elevation in application operating temperature while maintaining its strength.
Made from 18-8 stainless
Oval head Phillips.
10-32 diameter.
Length of 1-1/2".

$38.72
$0.3872

+ -