Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
METRIC MACH. SCREW PHILLIPS PAN HD M6-1.0 X 30
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M6-1.0 diameter.
- Length is 30 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$0.3588
METRIC MACH. SCREW PHILLIPS PAN HD M6-1.0 X 35
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M6-1.00 diameter.
- Length is 35 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$0.4125
MACHINE SCREW PHIL FLAT HEAD M6-1.0X 40
- A thread forming tapping screw with spaced threads and a gimlet point
- For self starting in thin metal or resin-filled plywood
- A countersunk head with a flat top surface and a cone-shaped bearing surface
- Used in applications where protrusion of the fastener above the mating surface is unacceptable
- Flat head, phillips drive
- Zinc plated steel
$0.5752
METRIC MACH. SCREW PHILLIPS PAN HD M6-1.0 X 40
- A metric machine screw is a straight shank fastener with a metric thread pitch designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
- Metric screws are the type almost exclusively used in items manufactured in Europe.
- M6-1.00 diameter.
- Length is 40 mm.
- Zinc plated.
- Normally class 4.8.
- Made from carbon steel.
- Pan head Phillips.
$0.5024
HEX NUT METRIC ZINC M8-1.25 CL 10
- A hex nut with a metric thread pitch.
- Class 10.
- Intended for use with screws and bolts of property class 10.9 or lower.
- Widely used in farm equipment and automotive related industries.
- Made from low carbon steel.
- Size: M8-1.25.
$0.258
HEX NUT METRIC ZINC M8-1.0 CL 8
- A hex nut with a metric thread pitch.
- Class 8.
- Intended for use with screws and bolts of property class 8.8 or lower.
- Widely used in the automotive and electronics industry.
- Made from low carbon steel.
- Size: M8-1.0.
$0.2655
KEP NUT METRIC ZINC M8-1.25
- Keps nuts, also known as K lock nuts.
- A hex nut pre-assembled with a free spinning external tooth lock washer.
- The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
- The most popular type of locknut because of its versatility, cost and ease of installation.
- Steel, zinc plated.
$0.6848
LOCK NUT NYLON INSERT ZINC M10-1.50 CL 8
- Hex nut with a nylon-filled collar at its back end.
- When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
- Restricts movement of the screw when it is subjected to vibration.
- Class 8.
- Designed to be used in structural application with class 8.8 or less cap screws or bolts.
- Reusable.
- Less expensive than Grade C Stover lock nuts.
- Made from low carbon steel.
- Size: M10-1.50.
- Zinc plated.
$0.5224
