Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
COTTER PIN - ZINC 5/16" X 3"
- Metal, extended prong type cotter pin
- Extended prong makes separating the tines easier
- Used to anchor various assemblies by insertion into a drilled hole of a shaft or pin and spreading the points to hold the assembly in position
- When used with castle or slotted nuts, it becomes a safety locking device
- Low carbon steel, zinc plated material
- Diameter is 5/16"
- Length is 3"
$1.5782
CARRIAGE BOLT UNC ZINC 5/16"-18 X 5" GR A
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated
- Tensile strength: 60,000 psi minimum.
$0.956
KEYSTOCK ZINC 5/8", 12 INCH STICK
- Made from 1018 carbon steel.
- Used in machines with rotating devices to provide driving torque between shafts and pulleys, gears and sprockets.
- Zinc plated.
- Diameter: 5/8" square.
- 12" long.
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 5/8"-11 X 2-1/2", GR 8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 5/8"-11.
- Length: 2-1/2".
$6.2292
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 5/8"-11 X 2", GR 8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 5/8"-11.
- Length: 2".
$4.4238
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 5/8"-11 X 3" GR8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 5/8"-11.
- Length: 3".
$7.828
HEX CAP SCREW BOLT 5/8-11" X 8" GR 8 ZINC
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
$7.4412
HEX CAP SCREW BOLT 5/8-11" X 6-1/2" GR 8 ZINC
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- ZINC
- Diameter: 5/8"
- Length: 6-1/2"
$6.186
HEX CAP SCREW BOLT 5/8-11" X 7" GR 8 UNPLATED
- Made from medium carbon alloy steel.
$6.0711
HEX CAP SCREW BOLT METRIC ZINC M5-0.80 X 25, CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
$0.55
HEX CAP SCREW BOLT METRIC ZINC M5-0.80 X 20, CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 20 mm.
- Class 10.9
$0.192
HEX CAP SCREW BOLT METRIC ZINC M5-0.80 X 16, CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 16 mm.
- Class 10.9
$0.2184
