Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
MACHINE SCREW TORX PAN HD #10-24 X 3/4" STAINLESS
- A straight shank fastener with external threads designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw.
- Machine screws form a fastening superior in strength to spaced thread screws.
$0.444
MACHINE SCREW PHILLIPS PAN HD #10-32 X 1-1/2" BLACK OXIDE
- PAN HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
$1.7784
MACHINE SCREW PHILLIPS PAN HD 10-32 X 1-1/4" BLACK
- PAN HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Pan head Phillips.
$0.6104
MACHINE SCREW PHIL TRUSS HD #10-32 X 1/2" STAINLESS
- Machine Screw
- Phillips Drive
- Truss Head
- 18-8 Stainless Steel
- #10-32 X 1/2"
$0.4356
HEX CAP SCREW BOLT METRIC ZINC M10-1.25 X 30 CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric fine threads.
- Diameter: M10-1.25.
- Length: 30 mm.
$1.4269
METAL SCREW PHILLIPS FLAT HEAD #10 X 1-1/4"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 10
- Screw length 1-1/4 inches
$0.2175
TEK SCREW PHILLIPS PAN HEAD #10 X 1/2", STAINLESS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Stainless Steel
$0.418
SHEET METAL SCREW SQ DR PAN HD #10 X 1/2"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan head square drive.
- Square drive increases productivity with excellent torque transmission and resists cam-out.
- Zinc plated steel
- Screw diameter 10
- Screw length is 1/2 inch
$0.1785
TEK SCREW SQUARE DRIVE PAN HD #10 X 1/2"
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Pan head, square drive head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 10
- Length: 1/2"
$0.2916
CLEVIS PINS 1/2" X 1-1/2"
- Single hole clevis pin
- 1/2" diameter
- 1-1/2" long
- Plain finish
$1.9981
FRAME BOLT FLANGE HD, NON-SERRATED, UNC BLACK 1/2"-13 X 1-1/4" GR8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Plain black finish.
- Tensile strength: 150,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 1/2"-13.
- Length: 1-1/4".
$2.2692
FRAME BOLT FLANGE HEAD, NON SERRATED, UNC ZINC 1/2"-13 X 1-1/4" GR 8
- Made from high alloy steel.
- One piece hex washer head bolt with a flat bearing surface.
- For use on truck frames.
- Flange eliminates washers and helps compensate for a misaligned hole.
- Zinc finish.
$3.5415
