Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
SHEET METAL SCREW QUAD DR PAN HD #8 X 2" BLACK
8X2RH2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$29.40
$0.294
$0.294
WOOD SCREW PHILLIPS FLAT HEAD #8 X 3/4"
8X34FPWS
- A thread forming screw having a gimlet point, and a sharp crested, coarse pitch thread.
- Will produce a mating thread when assembled into wood or other resilient materials.
- Flat head Phillips.
- Zinc plated steel.
- Diameter: 8
- Length: 3/4"
$19.20
$0.192
$0.192
SHEET METAL SCREW OVAL PHIL HD #8 X 2" STAINLESS
8X2OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 2 inches
$33.00
$0.33
$0.33
SHEET METAL SCREW OVAL PHIL HD #8 X 3/4" STAINLESS
8X34OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 8
- Screw length 3/4 inch
$29.70
$0.297
$0.297
SHEET METAL SCREW QUAD DR PAN HD #8 X 2" WHITE
8X2RH3
- A thread forming tapping screw with spaced threads and a gimlet point.
- Can be substituted in most applications for round, truss or binding screws.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a round top surface, cylindrical sides and a flat bearing surface.
- Zinc plated steel, with heads painted white.
- Great for RV applications.
- Square drive
- Screw diameter 8
- Screw length is 2 inches
$32.88
$0.3288
$0.3288
SHEET METAL SCREW PHIL PAN HD #8 X 2"
8X2P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 2"
$22.95
$0.2295
$0.2295
SHEET METAL SCREW PHIL PAN HD #8 X 3/4"
8X34P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 3/4"
$15.40
$0.154
$0.154
SHEET METAL SCREW PHIL PAN HD #8 X 3/4" STAINLESS
8X34PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 8
- Screw length 3/4 inch
$27.15
$0.2715
$0.2715
TEK SCREW PHILLIPS PAN HEAD #8 X 3/4"
8X34PT
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Phillips pan head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 3/4"
$19.00
$0.19
$0.19
TEK SCREW PHILLIPS PAN HEAD #8 X 3/4" , BLACK
8X34PT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Phillips pan head.
- Steel zinc black.
- Diameter: 8
- Length: 3/4"
$40.84
$0.4084
$0.4084
SHEET METAL SCREW QUAD DR PAN HD #8 X 3/4" BLACK
8X34RH2
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$22.20
$0.222
$0.222
TEK SCRW QUAD-DRIVE PAN HD #8 X 3/4" BLACK
8X34RHT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
$24.90
$0.249
$0.249
SHEET METAL SCREW QUAD DR PAN HD #8 X 3/4" WHITE
8X34RH3
- A thread forming tapping screw with spaced threads and a gimlet point.
- Can be substituted in most applications for round, truss or binding screws.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a round top surface, cylindrical sides and a flat bearing surface.
- Zinc plated steel, with heads painted white.
- Great for RV applications.
- Square drive
- Screw diameter 8
- Screw length is 3/4 inch
$22.20
$0.222
$0.222
SHEET METAL SCREW QUAD DR PAN HD #8 X 3/4" TAN HEAD
8X34RH11
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
$23.06
$0.2306
$0.2306
TEK SCRW QUAD-DRIVE PAN HD #8 X 3/4" WHITE
8X34RHT3
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Round washer head, phillips drive.
- Zinc plated steel with white painted heads.
- Diameter: 8
- Length: 3/4"
$24.90
$0.249
$0.249
SHEET METAL SCREW RND WASHER #8 X 3/4", QUAD DRIVE
8X34RWHQ
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Round washer heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- Quad drives provide ability to use several driver bits.
- Zinc plated steel.
- Round washer head, quad drive
- Screw diameter 8
- Screw length 3/4 inch
$23.40
$0.234
$0.234
TEK SCREW RND WASHER HD PHILLIPS #8 X 3/4" , BLACK
8X34RWT2
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Rockwell hardness C52-58.
- Round washer head, phillips drive.
- Steel zinc black.
- Diameter: 8
- Length: 3/4"
$19.80
$0.198
$0.198
TEK SCREW HEX WASHER HD #8 X 3/4"
8X34T
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 8
- Length: 3/4"
$15.30
$0.153
$0.153
TEK SCREW HEX WASHER HEAD - BL #8 X 3/4"
8X34T2
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Hex washer head
- Black oxide
$24.48
$0.2448
$0.2448
HEX CAP SCREW BOLT METRIC ZINC M8-1.25 X 35, CL 8.8
8X35M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M8-1.25.
- Length: 35 mm.
$19.855
$0.3971
$0.3971
SHEET METAL SCREW HEX WASH HD #8 X 3/8"
8X38H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 8
- Screw length 3/8 inch
$15.60
$0.156
$0.156
SHEET METAL SCREW PHIL PAN HD #8 X 3/8"
8X38P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 3/8"
$12.60
$0.126
$0.126
SHEET METAL SCREW HEX WASH HD #8 X 3"
8X3H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 8
- Screw length 3 inches
$24.84
$0.2484
$0.2484
SHEET METAL SCREW PHIL PAN HD #8 X 3"
8X3P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 8
- Length: 3"
$32.40
$0.324
$0.324
Refine
10 More
2 More
1 More
49 More
45 More