Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
HEX CAP SCREW BOLT UNC ZINC 5/8"-11 X 5-12", GR 5
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
- Length: 5-1/2".
$4.0118
HEX CAP SCREW BOLT UNC ZINC 5/8"-11 X 5-1/2", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
- Length: 5-1/2".
$6.5808
HEX CAP SCREW BOLT UNF ZINC 5/8"-18 X 5-1/2", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 5/8"-18.
- Length: 5-1/2".
$6.168
HEX CAP SCREW BOLT UNC ZINC 5/8"-11 X 5", GR 5
- Made from low or medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
- Length: 5".
$3.8286
HEX CAP SCREW BOLT UNC ZINC 5/8"-11 X 5", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
- Length: 5".
$9.6712
HEX CAP SCREW BOLT UNF ZINC 5/8"-18 X 5", GR 5
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNF.
- Diameter: 5/8"-18.
- Length: 5".
$4.9768
HEX CAP SCREW BOLT UNF ZINC 5/8"-18 X 5", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNF.
- Diameter: 5/8"-18.
- Length: 5".
$5.6665
HEX CAP SCREW BOLT UNC ZINC 5/8"-11 X 6", GR 5
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
- Length: 6".
$4.4316
HEX CAP SCREW BOLT UNC ZINC 5/8"-11 X 6", GR 8
- Made from medium carbon alloy steel.
- Heat treated.
- Tensile strength: 150,000 psi. minimum.
- Yellow zinc plated.
- Unified screw threads :UNC.
- Diameter: 5/8"-11.
- Length: 6".
$7.3464
HEX CAP SCREW BOLT UNF ZINC 5/8"-18 X 6", GR 5
- Made from medium carbon steel.
- Heat treated.
- Tensile strength: 120,000 psi. minimum.
- Zinc plated.
- Unified screw threads :UNF.
- Diameter: 5/8"-18.
- Length: 6".
$5.9509
HEX CAP SCREW BOLT METRIC ZINC M5-.80 X 10, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 10 mm.
$0.208
HEX CAP SCREW BOLT METRIC ZINC M5-.80 X 12, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 12 mm.
$0.148
HEX CAP SCREW BOLT METRIC ZINC M5-.80 X 20, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 20 mm.
$0.2264
HEX CAP SCREW BOLT METRIC ZINC M5-.80 X 35, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 35 mm.
$0.3185
HEX CAP SCREW BOLT METRIC ZINC M5-.80 X 40, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 40 mm.
$0.297
HEX CAP SCREW BOLT METRIC ZINC M5-.80 X 25, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 25 mm.
$0.19
HEX CAP SCREW BOLT METRIC ZINC M5-.80 X 30, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 30 mm.
$0.1616
HEX CAP SCREW BOLT METRIC ZINC M5-.80 X 50, CL 8.8
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M5-.80.
- Length: 50 mm.
$0.506
CUP-POINT SOCKET SET-SCREW #6-32 X 1/4"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #6-32
- Length: 1/4"
$0.6432
CUP-POINT SOCKET SET-SCREW #6-32 X 3/4"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #6-32
- Length: 3/4"
$0.5816
CUP-POINT SOCKET SET-SCREW #6-32 X 3/16"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #6-32
- Length: 3/16"
$0.2544
CUP-POINT SOCKET SET-SCREW #6-32 X 3/8"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #6-32
- Length: 3/8"
$0.2808
CUP-POINT SOCKET SET-SCREW #6-32 X 5/16"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #6-32
- Length: 5/16"
$0.341
CUP-POINT SOCKET SET-SCREW #6-32 X 5/8"
- A headless screw threaded the entire length.
- It has a hex drive at one end and a cup-shaped indentation at the other end.
- The cup point is the most used style set screw.
- Rockwell hardness of C45-53.
- Diameter: #6-32
- Length: 5/8"
$0.436