Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
RETAINING/SNAP RING EXTERNAL, 7/8"
- A ring-shaped stamping with one opening on the circumference.
- The two ends at the opening are called lugs and flare out slightly allowing for easier installation onto shaft.
- Installed axially on to a shaft.
- Allows for complete contact and tightness in a groove.
- Can be safely used in a temperature range of -100 to 500°s F.
- Carbon steel material, heat treated.
- For shaft diameter of 7/8".
$0.8869
FLATHEAD THREADED NUT UNC ALUM #10-24 THICKNESS .010-.080
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .250 min .254 max
$0.6616
FLATHEAD THREADED NUT UNC ALUM 1/4"-20 GRIP RANGE .020 - .080
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .332 min .338 max
$1.3048
FLATHEAD THREADED NUT UNC ALUM 3/8"-16 GRIP RANGE .010 -.115
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .490 min .500 max
$2.21
FLATHEAD THREADED NUT UNC ALUM 5/16"-18 GRIP .030 - .0125
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .413 min .423 max
$1.3909
FLATHEAD THREADED NUT UNC ALUM #8-32 GRIP RANGE .010 - .075
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .221 min .226 max
$0.6832
FLATHEAD THREADED NUT UNC ALUM #6-32 GRIP RANGE .010 - .075
- Aluminum Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .189 min .193 max
$0.6912
FLATHEAD THREADED NUT UNF STEEL #10-24 THICKNESS .010-.080
- Steel Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .250 min .254 max
$0.7728
FLATHEAD THREADED NUT UNC STEEL 1/4"-20 THICKNESS .010-.080
- Steel Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .332 min .338 max
$1.0318
FLATHEAD THREADED NUT UNC ALUM #6-32 THICKNESS .010-.080
- Steel Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .189 min .193 max
$0.6576
FLATHEAD THREADED NUT UNC STEEL #8-32 THICKNESS .010-.080
- Steel Flat Head rivet nuts.
- Are designed to provide a very efficient and cost-effective method of placing permanent threads in thin materials.
- Perfect for use in metals, fiberglass, and rigid plastics.
- Provide a neat appearance.
- Provide permanent, captive threads after installation.
- Flat Head design provides the most bearing surface for higher torque applications.
- Hole size: .221 min .226 max
$0.7272
FLAT WASHER METRIC ZINC M10
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 10.5 Max 10.77
- Outside Diameter: Min 19.48 Max 20
$0.177
FLAT WASHER USS ZINC 1"
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 2-1/2"
- Inside Diameter: 1-1/16"
$2.8613
FLAT WASHER METRIC ZINC M12
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 13 Max 13.27
- Outside Diameter: Min 23.48 Max 24
$0.279
FLAT WASHER USS STAINLESS #12
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Used where parts are subject to corrosion.
- Made from 18-8 stainless steel.
$0.2055
FLAT WASHER USS ZINC 1/4"
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 3/4"
- Inside Diameter: 5/16"
$0.192
FLAT WASHER METRIC ZINC M14
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 15 Max 15.27
- Outside Diameter: Min 27.48 Max 28
$0.443
FLAT WASHER METRIC ZINC M16
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 17 Max 17.27
- Outside Diameter: Min 29.48 Max 30
$0.4896
FLAT WASHER USS ZINC 3/4"
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 2"
- Inside Diameter: 13/16"
$0.8428
FLAT WASHER USS ZINC 3/8"
- Used to improve stress distribution, and to span large holes.
- USS PATTERN.
- Made from low carbon steel, zinc plated.
- Outside Diameter: 1"
- Inside Diameter: 7/16"
$0.2925
FLAT WASHER METRIC ZINC M3
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 3.2 Max 3.38
- Outside Diameter: Min 6.64 Max 7
$0.08
FLAT WASHER METRIC ZINC M4
- Used to improve stress distribution, and to span large holes.
- Din 125A
- Made from low carbon steel, zinc plated.
- Inside Diameter: Min 4.3 Max 4.48
- Outside Diameter: Min 8.64 Max 9
$0.092