Fasteners
Industrial Fasteners for Construction, Fabrication & Maintenance
Industrial fasteners are the backbone of mechanical fastening, anchoring, and structural assembly across a wide range of industries. Our comprehensive selection is engineered to meet the rigorous demands of industrial, fleet, and maintenance, repair, and operations (MRO) applications. Whether you require metric or standard sizes, our fasteners ensure compatibility and consistent sizing for seamless repair, replacement, and new installations. From heavy-duty construction projects to precision fabrication and ongoing equipment service, our hardware solutions support every phase of your operation. Explore a broad inventory designed for structural integrity, mechanical reliability, and secure anchoring—empowering your team to work efficiently and safely, no matter the jobsite or application.
Bolts, Screws & Threaded Rod
Discover our extensive range of bolts, screws, and threaded rod, available in both standard and metric dimensions. These essential fasteners provide reliable mechanical connections for structural assembly, equipment installation, and repair. For more details, visit our Bolts, Screws & Threaded Rod category.
Nuts, Washers & Locking Hardware
Ensure secure fastening and load distribution with our selection of nuts, washers, and locking hardware. Designed for compatibility with a variety of bolts and threaded rods, these components are critical for maintaining joint integrity in demanding environments. Explore the full range in our Nuts, Washers & Locking Hardware section.
Anchors & Threaded Inserts
Achieve dependable anchoring in concrete, masonry, and other substrates with our anchors and threaded inserts. These solutions are ideal for structural and mechanical applications where secure, long-lasting fastening is required. Learn more in our Anchors & Threaded Inserts category.
Pins, Retaining Rings & Rivets
For applications requiring precise alignment, retention, or permanent assembly, our pins, retaining rings, and rivets deliver consistent performance. These specialty fasteners are essential for equipment maintenance, fabrication, and assembly tasks. Visit our Pins, Retaining Rings & Rivets page for more information.
Specialty Fasteners & Hardware
Address unique fastening challenges with our specialty fasteners and hardware, including tamper-resistant, high-strength, and application-specific solutions. Support your fabrication, installation, and service needs with products engineered for reliability and ease of use. Browse our Specialty Fasteners & Hardware category for tailored options.
Value Propositions
- Broad selection of standard and metric fasteners for every application
- Suitable for industrial, fleet, and maintenance use
- Structural, mechanical, and anchoring solutions for diverse environments
- Consistent sizing for efficient repair and replacement
- Supports fabrication, installation, and equipment service
TEK SCREW HEX WASHER HD 1/4" X 1-3/4"
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
- Rockwell hardness C52 minimum.
- Diameter: 14
- Length: 1-3/4"
$0.4125
CARRIAGE BOLT UNC ZINC 1/4"-20 X 1" GR A
- Made from low or medium carbon steel.
- Round head bolt with a square neck under the head.
- The square neck is designed to keep the bolt from turning as the nut is tightened.
- Zinc plated.
- Tensile strength: 60,000 psi minimum.
- Unified screw threads: UNC.
- Diameter: 1/4"-20.
- Length: 1".
$0.2248
METAL SCREW PHILLIPS FLAT HEAD #14 X 1"
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a flat top surface and a cone-shaped bearing surface.
- Used in applications where protrusion of the fastener above the mating surface is unacceptable.
- Flat head, phillips drive
- Zinc plated steel.
- Screw diameter 14
- Screw length 1 inch
$0.3553
SHEET METAL SCREW PHIL FLAT HD #14 X 1" STAINLESS
- Sheet Metal Screw
- Phillips Drive
- Flat Head
- 18-8 Stainless Steel
- 1/4" X 1"
$0.42
FENDER WASHER STAINLESS 1/4" X 1"
- A flat washer with more surface area than a USS or SAE washer.
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of 18-8 stainless steel.
- Inside Diameter: 1/4"
- Outside Diameter: 1"
$0.469
TEK SCREW PHILLIPS PAN HEAD #14 X 1"
- A tapping screw with spaced threads and a drill point which drills its own hole
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps
- Phillips pan head
- Steel zinc plated
$0.7832
TEK SCREW HEX WASHER HD #14 X 1", STAINLESS
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Grade 410 Stainless
$0.70
TEK SCREW HEX WASHER HD UNSLOTTED, CLIMASEAL #14 X 1" 2500 PCS.
- Tek 3 Steel to Steel Self-Drilling Screws
- Climaseal Gray Coating
- Use 3/8" Drive Socket
- Head style 3/8" HWH
- Carbon Steel
$0.7512
HEX CAP SCREW BOLT METRIC ZINC M14-2.00 X 25 CL 10.9
- Hex head cap screw with metric thread pitch made from medium carbon alloy steel.
- Heat treated
- Tensile strength: 1040 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M14-2.00.
- Length: 25 mm.
$1.7556
TEK SCREW HEX WASHER HD 1/4" X 2-1/2"
- A tapping screw with spaced threads and a drill point which drills its own hole.
- May be used to attach plywood, soft woods or composition board to metal, or attach metal to metal.
- All self-drilling screws offer economical benefits: reduces labor and tooling costs; reduces or eliminates drill bits and taps.
- Hex washer head.
- Steel zinc plated.
$0.54
METAL SCREW HEX WASHER HEAD #14 X 2-1/2"
- HEX HEAD
- #14 DIAMETER
- SHEET METAL SCREW
- ZINC FINISH
$0.7693
FENDER WASHER ZINC 1/4" X 2"
- Made from thinner gauge metal than most flat washers.
- Used where an extra wide bearing surface is required.
- Originally designed for auto body repair, they are also used in sheet metal, plumbing, and electrical work.
- Made of zinc plated steel.
- Inside Diameter: 1/4"
$0.7152