Shop
Showing 9433–9444 of 9602 results
-
WEATHERSTRIP ADHESIVE 3M, YELLOW 5 OZ
Read moreWEATHERSTRIP ADHESIVE 3M, YELLOW 5 OZ
SKU: 3M08001 Categories: Adhesives, Chemicals & Paint- 3M super weatherstrip and gasket adhesive.
- A strong, flexible, rubbery adhesive that can withstand vibration, oil, grease and extreme temperature variations.
- It can be used to bond weatherstripping to car doors, trunks, moon roofs, and sun roofs.
- Excellent adhesion for holding paper, cork, or rubber gaskets in place during installation.
- 5 ounce tube.
Case Quantity: 1 -
WEATHERSTRIP ADHESIVE BLACK 5 OZ. TUBE
Read moreWEATHERSTRIP ADHESIVE BLACK 5 OZ. TUBE
SKU: X3M08008 Categories: Adhesives, Chemicals & Paint- 3M super weatherstrip adhesive.
- A strong, flexible, rubbery adhesive that can withstand vibration and extreme temperature variation.
- It can be used to bond automotive weatherstripping.
- It is a great adhesive for holding paper, cork, or rubber gaskets in place during installation.
- 5 ounce tube.
3M super weatherstrip adhesive. A strong, flexible, rubbery adhesive that can withstand vibration and extreme temperature variation. It can be used to bon
Case Quantity: 1 -
WEATHERSTRIP RETAINER FORD EDGE 2007-ON 100/PACK
Read more -
WEATHERSTRIP, 5/32 X 3/8, PEEL-BAK, 50′ ROLL
Read more -
WEILDER KNOT WIRE WHEEL 3 WITH 1/4 SHANK
Read moreWEILDER KNOT WIRE WHEEL 3 WITH 1/4 SHANK
SKU: XW17681 Categories: Abrasives, Wire Wheel- SAUCER-SHAPED RADIAL WHEEL THAT PROVIDES A HEAVY-DUTY BRUSHING ACTION WITH SOME FLEXIBILITY
- GOOD FOR REMOVING HEAVY BURRS AFTER CUTTING
- USED FOR WELD PREPARATION AND CLEANING
- 3″ DIAMETER
- .014 STEEL WIRE SIZE
SAUCER-SHAPED RADIAL WHEEL THAT PROVIDES A HEAVY-DUTY BRUSHING ACTION WITH SOME FLEXIBILITY GOOD FOR REMOVING HEAVY BURRS AFTER CUTTING USED FOR WELD PREP
Case Quantity: 1 -
WEILER CRIMPED WIRE END BRUSH, STEEL, 1 X 1
Read moreWEILER CRIMPED WIRE END BRUSH, STEEL, 1 X 1
SKU: XW10009 Category: Abrasives- 1″ diameter
- Wire size .006
- Trim Length 1″
- 22,000 Max RPM
- Crimped Wire 1/4″ shank size
1″ diameter Wire size .006 Trim Length 1″ 22,000 Max RPM Crimped Wire 1/4″ shank size
Case Quantity: 1 -
WEILER POWER TUBE BRUSH 3/4 DIAM.
Read moreWEILER POWER TUBE BRUSH 3/4 DIAM.
SKU: XW21076 Categories: Hand Brush, Tools and Equipment- Single continuous length of stainless steel stem wire
- Single spiral of crimped wire fill for a more flexible brushing action
- Use fully chucked on smooth or threaded blind holes
- Diameter 3/4″
- 1″ Brush Length
- OAL 3-1/2″
Single continuous length of stainless steel stem wire Single spiral of crimped wire fill for a more flexible brushing action Use fully chucked on smooth o
Case Quantity: 1 -
WEILER SCRATCH BRUSH BLACK NYLON
Read moreWEILER SCRATCH BRUSH BLACK NYLON
SKU: XW99383 Categories: Hand Brush, Tools and Equipment- For general cleaning in the plating, metal finishing, aircraft and missile industries
- Plastic Handle
- Curved Handle
- For Cleaning Dirt, Rust, Scale, Chips and Paint
- Block width 1/2″
- OAL 6-1/2″
- Black Nylon Bristle
For general cleaning in the plating, metal finishing, aircraft and missile industries Plastic Handle Curved Handle For Cleaning Dirt, Rust, Scale, Chips
Case Quantity: 1 -
WEILER SCRATCH BRUSH SS 3X7
Read moreWEILER SCRATCH BRUSH SS 3X7
SKU: XW44167 Categories: Hand Brush, Tools and Equipment- SAUCER-SHAPED RADIAL WHEEL THAT PROVIDES A HEAVY-DUTY BRUSHING ACTION WITH SOME FLEXIBILITY
- GOOD FOR REMOVING HEAVY BURRS AFTER CUTTING
- USED FOR WELD PREPARATION AND CLEANING
- 3″ DIAMETER
- .014 STEEL WIRE SIZE
SAUCER-SHAPED RADIAL WHEEL THAT PROVIDES A HEAVY-DUTY BRUSHING ACTION WITH SOME FLEXIBILITY GOOD FOR REMOVING HEAVY BURRS AFTER CUTTING USED FOR WELD PREP
Case Quantity: 1 -
WELD-AID HEAVY DUTY ANTI SPATTER
Read more -
WELDED RING 2-1/2″ ID X .262 WIRE DIAMETER
Read more -
WELDER PENCIL SILVER
Read moreWELDER PENCIL SILVER
SKU: WPSILVER Categories: Welder Pencil, Welding- Silver welder’s pencil.
- Marks are resistant to torch flames.
- Will not rub off, or burn off like soapstone.
- Highly visible marks illuminate when cutting or welding.
- Durable marks will not scratch metal surfaces.
- Sharpen with any standard pencil sharpener.
Silver welder’s pencil. Marks are resistant to torch flames. Will not rub off, or burn off like soapstone. Highly visible marks illuminate when cutting o
Case Quantity: 1