Shop
Showing 5977–5988 of 7860 results
-
RUBBER GROMMET 7/8″ID, 1-1/4″DRILL, 1/4″GRV
Read moreRUBBER GROMMET 7/8″ID, 1-1/4″DRILL, 1/4″GRV
SKU: RG78-14 Categories: Grommets, Wire Management- Protects wires from chafing against drilled holes.
- Grommets are sized by groove width, inside dimension, and groove diameter.
- Made from 60 durometer SBR rubber.
- 7/8″ inside dimension, 1-1/4″ drill hole, with a 1/4″ groove.
Case Quantity: 25 -
RUBBER GROMMET 7/8″ID, 1-1/4″DRILL, 1/8″GRV
Read moreRUBBER GROMMET 7/8″ID, 1-1/4″DRILL, 1/8″GRV
SKU: RG78-18 Categories: Grommets, Wire Management- Protects wires from chafing against drilled holes.
- Grommets are sized by groove width, inside dimension, and groove diameter.
- Made from 60 durometer SBR rubber.
- 7/8″ inside dimension, 1-1/4″ drill hole, with a 1/8″ groove.
Case Quantity: 25 -
RUBBER GROMMET 7/8″ID, 1-1/4″DRILL, 3/16″GRV
Read moreRUBBER GROMMET 7/8″ID, 1-1/4″DRILL, 3/16″GRV
SKU: RG78-36 Categories: Grommets, Wire Management- Protects wires from chafing against drilled holes.
- Grommets are sized by groove width, inside dimension, and groove diameter.
- Made from 60 durometer SBR rubber.
- 7/8″ inside dimension, 1-1/4″ drill hole, with a 3/16″ groove.
Case Quantity: 25 -
RUBBER GROMMET CONE 55/64 DRILL 5/8 I.D.
Read moreRUBBER GROMMET CONE 55/64 DRILL 5/8 I.D.
SKU: XAI5436EPDM40 Categories: Grommets, Wire Management- 55/64″ DRILL
Case Quantity: 50 -
RUBBER MOUNTING GROMMET 2″ LAMP
Read moreRUBBER MOUNTING GROMMET 2″ LAMP
SKU: VSM9139 Categories: Electrical, Lighting - Truck & Trailer- Mounting cup (open back for 2-5/16″ mounting hole)
- For VSM1030, 1035, 1040 & 1045 series lamps.
- Size: 2-316″ diameter x 13/16″ Deep.
Case Quantity: 1 -
RUBBER MOUNTING GROMMET 4″ LAMP
Read moreRUBBER MOUNTING GROMMET 4″ LAMP
SKU: VSM9127 Categories: Electrical, Lighting - Truck & Trailer- Shock-Proof.
- Black rubberized vinyl.
- Replacement mounting grommet for all VSM40 series incandescent and VSM44 series LED lamps.
Case Quantity: 1 -
RUBBER MOUNTING GROMMET 6″ LAMP
Read moreRUBBER MOUNTING GROMMET 6″ LAMP
SKU: VSM9526 Categories: Electrical, Lighting - Truck & Trailer- For mounting VSM60 series incandescent and VSM64 series LED sealed lamps and VSM9525 mounting bracket.
Case Quantity: 1 -
RUBBER MOUNTING GROMMET FOR 2-1/2″ LAMP
Read moreRUBBER MOUNTING GROMMET FOR 2-1/2″ LAMP
SKU: VSM9119 Categories: Electrical, Lighting - Truck & Trailer- 2-1/2″ sealed lamp rubber mounting grommet.
- For VSM1010, 1011, 1015 & 1055 series lamps.
- Size: 3-3/16″ diameter x 1-3/16″ deep.
Case Quantity: 1 -
RUBBER TARP STRAP 21″ 50 PC MINIMUM
Read moreRUBBER TARP STRAP 21″ 50 PC MINIMUM
SKU: XAPRS-22 Categories: Air Tools, Tools and Equipment- Weather resistant
- Heat treated steel hooks
- Suitable for all vehicles including EV
Case Quantity: 48 -
SAE 45 DEGREE FLARE BRASS UNION 1/2″
Read moreSAE 45 DEGREE FLARE BRASS UNION 1/2″
SKU: X42X8 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/2″ tube
Case Quantity: 5 -
SAE 45 DEGREE FLARE BRASS UNION 1/4″
Read moreSAE 45 DEGREE FLARE BRASS UNION 1/4″
SKU: X42X4 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/4″ tube
Case Quantity: 5 -
SAE 45 DEGREE FLARE BRASS UNION 1/8″
Read moreSAE 45 DEGREE FLARE BRASS UNION 1/8″
SKU: X42X2 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/8″ tube
Case Quantity: 5