Shop

Showing 5953–5964 of 8362 results

PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, STRAIGHT MALE CONNECTOR, 3/8″ TUBE X 1/4″ PIPE

PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, STRAIGHT MALE CONNECTOR, 3/8″ TUBE X 1/4″ PIPE

Part # X1168X6

Case Quantity 5
View Details
Read more
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, STRAIGHT MALE CONNECTOR, 3/8″ TUBE X 1/4″ PIPE
SKU: X1168X6 Categories: Brass Fittings, Pipe & Tube Fittings
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- Union connector
- 3/8″ tube to 1/4″ male pipe
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, SWIVEL, MALE 90 DEGREE ELBOW, 5/32″ TUBE X 1/8″ PIPE

PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, SWIVEL, MALE 90 DEGREE ELBOW, 5/32″ TUBE X 1/8″ PIPE

Part # X1169X2.5S

Case Quantity 10
View Details
Read more
PUSH TO CONNECT, NON-DOT, NICKLE PLATED BRASS, SWIVEL, MALE 90 DEGREE ELBOW, 5/32″ TUBE X 1/8″ PIPE
SKU: X1169X2.5S Categories: Brass Fittings, Pipe & Tube Fittings
- Push to connect fitting
- Ready to use compact one-piece fittings for use with most thermoplastic tubing.
- Specially designed for low pressure circuits where fast assembly, disassembly and reassembly is important.
- No special tools are needed for assembly.
- Designed to be used with no tube support.
- 90° male elbow
- Size 5/32″ tubing o.d., 1/8″ male pipe
PUSH TYPE RETAINER 10/BX

PUSH TYPE RETAINER 10/BX

Part # XA20955

Case Quantity 1
View Details
Read more
PUSH TYPE RETAINER 10/BX
SKU: XA20955 Categories: Body Hardware, Fleet & Automotive
- Engine under cover push-type retainer
- Fits into 7mm hole
- Black nylon
- 10 per box
PUSH-LOCK MALE CONNECTOR 1/2″ T X 3/8″ P COMPOSITE

PUSH-LOCK MALE CONNECTOR 1/2″ T X 3/8″ P COMPOSITE

Part # XV016186

Case Quantity 5
View Details
Read more
PUSH-LOCK MALE CONNECTOR 1/2″ T X 3/8″ P COMPOSITE
SKU: XV016186 Categories: Composite, Pipe & Tube Fittings
- 1/2″ T X 3/8″ P, PUSH IN A/B
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/8″ tubing o.d., 1/16″ male pipe
PUSH-LOCK MALE CONNECTOR 3/8″ T X 1/2″ P COMPOSITE

PUSH-LOCK MALE CONNECTOR 3/8″ T X 1/2″ P COMPOSITE

Part # XV016168

Case Quantity 5
View Details
Read more
PUSH-LOCK MALE CONNECTOR 3/8″ T X 1/2″ P COMPOSITE
SKU: XV016168 Categories: Composite, Pipe & Tube Fittings
- Push to connect composite connector
- Easy to assemble and is reusable
- Designed to resist mechanical pull out
- Meets performance requirements as stated in SAE J1131
- DOT 49 CFR 571.106 compliant
- For use with SAE J844 tubing
- Working pressure: up to 145 psi
- Temperature range of -40F to +140F
- 3/8″ tube to 1/2″ male Pipe
PUSH-PULL SWITCH, OFF/ON, TWO 12″ WIRES, 6-36 VOLTS DC

PUSH-PULL SWITCH, OFF/ON, TWO 12″ WIRES, 6-36 VOLTS DC

Part # XCHM-606

Case Quantity 1
View Details
Read more
PUSH-PULL SWITCH, OFF/ON, TWO 12″ WIRES, 6-36 VOLTS DC
SKU: XCHM-606 Categories: Circuit Protection, Switches
- Brass housing, plasticized.
- Two insulated copper wire leads, 12″ long.
- Chrome-plated brass knob.
- 10-32 thread.
PUSH-TYPE RETAINER, NYLON, BLACK 8.5MM X 22MM, 25/BOX

PUSH-TYPE RETAINER, NYLON, BLACK 8.5MM X 22MM, 25/BOX

Part # XA20889

Case Quantity 1
View Details
Read more
PUSH-TYPE RETAINER, NYLON, BLACK 8.5MM X 22MM, 25/BOX
SKU: XA20889 Categories: Body Hardware, Fleet & Automotive
- Cowl vent and fender push-type retainer
- Black nylon
- 25 per box
PUSHLOCK 90 MALE SWIVEL ELBOW 1/2″ T X 1/2″ P

PUSHLOCK 90 MALE SWIVEL ELBOW 1/2″ T X 1/2″ P

Part # XV016288

Case Quantity 5
View Details
Read more
PUSHLOCK 90 MALE SWIVEL ELBOW 1/2″ T X 1/2″ P
SKU: XV016288 Category: Special
- Push to connect composite 90° male swivel elbow
- Easy to assemble and is reusable
- Designed to resist mechanical pull out
- Meets performance requirements as stated in SAE J1131
- DOT 49 CFR 571.106 compliant
- For use with SAE J844 tubing
- Working pressure: up to 145 psi
- Temperature range of -40F to +140F
- 1/2″ tube to 1/2″ male Pipe
PUSHLOCK 90 MALE SWIVEL ELBOW 5/8″ T X 1/2″ P

PUSHLOCK 90 MALE SWIVEL ELBOW 5/8″ T X 1/2″ P

Part # XV016281

Case Quantity 1
View Details
Read more
PUSHLOCK 90 MALE SWIVEL ELBOW 5/8″ T X 1/2″ P
SKU: XV016281 Categories: Composite, Pipe & Tube Fittings
- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
QUEST COBRA COIL AND FIN CLEANER AEROSOL

QUEST COBRA COIL AND FIN CLEANER AEROSOL

Part # XQ541

Case Quantity 1
View Details
Read more
QUEST COBRA COIL AND FIN CLEANER AEROSOL
SKU: XQ541 Categories: Chemicals & Paint, Cleaners
- REMOVES ALL TYPES OF SOILS
- Upon contact with the surface, it flushes soil to the surface.
- It is not necessary to rins if applied in place to a functional unit that produces moisture.
- Net weight 15 oz.
QUICK LINK 3/8

QUICK LINK 3/8

Part # X38QLINK

Case Quantity 10
View Details
Read more
QUICK LINK 3/8
SKU: X38QLINK Category: Special
- Quick Link, 3/8-10mm, Carbon Steel, Zinc Plated
- Carbon steel is durable, affordable and generally easy to work with
- Quick link chain repair links are popular for light-duty repair applications and for attaching a hook, shackle, or anchor point
- Install quickly by unscrewing the gate, attaching the link onto two pieces of chain and screwing the link gate back to the closed position
QUICK LINK, 1/4″SINC PLATED STEEL

QUICK LINK, 1/4″SINC PLATED STEEL

Part # XCQL014

Case Quantity 10
View Details
Read more

QUICK LINK, 1/4″SINC PLATED STEEL

SKU: XCQL014 Category: Special

Case Quantity: 10

Log In For Pricing