Shop
Showing 4393–4404 of 7860 results
-
LUBRA CLEAR GEL PENETRANT/LUBRICANT NET WT 13 OZ.
Read moreLUBRA CLEAR GEL PENETRANT/LUBRICANT NET WT 13 OZ.
SKU: CPL-1 Categories: Chemicals & Paint, Penetrants & Lubricants- Penetrating gel lubricant.
- Transparent, high-pressure lubricant with high adhesive strength.
- A combination of natural and synthetic lubricants.
- With PTFE, which makes this one of the best available.
- Lasts longer than conventional lubricants.
- Withstands severe temperatures, working range -30°F to +600°F.
- Resists water washout.
- Applies as a thin penetrant and quickly sets to a clear tacky gel.
- Net weight 13 ounces.
Case Quantity: 1 -
LUBRICANT – VALVE & SEALANT
Read moreLUBRICANT – VALVE & SEALANT
SKU: XDOW111 Categories: Chemicals & Paint, Penetrants & Lubricants- Valve lubricant and sealant.
- Can be used as a lubricant for rubber and plastic.
- Can be used on faucet valves, valve stems, vacuum systems and ignition systems.
- It can be used as a sealant in vacuum and pressure systems.
- Can also be used in equipment subject to washing and harsh environments.
- 5.3 ounce tube.
Case Quantity: 12 -
LUBRICANT-CHAIN AND CABLE AEROSOL W/MOLY, 12.5 OZ
Read moreLUBRICANT-CHAIN AND CABLE AEROSOL W/MOLY, 12.5 OZ
SKU: XQ576 Categories: Chemicals & Paint, Penetrants & Lubricants- Chain and cable lubricant with Moly.
- Specially designed to provide maximum protection to wire ropes and chains of all types.
- Will completely penetrate into the strands of wire ropes, providing the ultimate in lubrication.
- Does not build up on chains to attract dust or dirt.
- Continued use of this product reduces chain whip, vibration and noise.
- Also protects against galling, seizing and wear, thus adding life to chain cable and sprockets.
- Prolongs life of chains, cables and wire ropes.
- Used for loosening rusted parts and lubrication of wire, cable, door hinges, chains, hoists, pulleys, cranes, forklifts and construction machinery.
- Net wt. 12.5 oz.
Case Quantity: 1 -
LUCAS RED TACKY GREASE 14 OZ CARTRIDGE
Read moreLUCAS RED TACKY GREASE 14 OZ CARTRIDGE
SKU: XAP10005 Categories: Chemicals & Paint, Greases- Smooth, tacky, red lithium complex grease.
- Fortified with rust and oxidation inhibitors.
- Has good water resistance and washout properties.
- Has excellent mechanical stability and storage life.
- Fortified with a high degree of extreme pressure additives.
Case Quantity: 10 -
LYNCH PIN – TAB LOCK SING 1/4″ X 2-1/2″, SQUARE BAIL
Read moreLYNCH PIN – TAB LOCK SING 1/4″ X 2-1/2″, SQUARE BAIL
SKU: XB28-144 Categories: Fasteners, Pins- Tab-lock style single wire handle
- The retainer wire is formed of tempered spring wire and cold-headed shank is of low carbon steel.
- 1/4″ diameter
- 2-1/2″ grip
Case Quantity: 25 -
LYNCH PIN 1/4 DIAMETER 1 9/16 PIN LENGTH
Read moreLYNCH PIN 1/4 DIAMETER 1 9/16 PIN LENGTH
SKU: XB211-20 Categories: Fasteners, Pins- 1/4″ Standard ring
- Nominal size 1/4″ x 1-9/16″
- Also called a Clik pin
Case Quantity: 10 -
LYNCH PIN 5/16 DIAMETER 1 9/16 PIN LENGTH
Read moreLYNCH PIN 5/16 DIAMETER 1 9/16 PIN LENGTH
SKU: XB213-20 Categories: Fasteners, Pins- 5/16″ standard ring
- Nominal size 5/16″ x 1-9/16″
- Also called a Clik pin
Case Quantity: 10 -
LYNCH PIN 7/16 DIAMETER 1 3/4 PIN LENGTH
Read moreLYNCH PIN 7/16 DIAMETER 1 3/4 PIN LENGTH
SKU: XB217-20 Categories: Fasteners, Pins- 7/16″ heavy duty ring
- Nominal size 7/16″ x 1-3/4″
- Also called a Clik pin
Case Quantity: 10 -
MACHINE SCREW FLAT HEAD PHILLIPS 1/4″-20 X 3/4″ BLACK ZINC
MACHINE SCREW FLAT HEAD PHILLIPS 1/4″-20 X 3/4″ BLACK ZINCPart # X1420X34FHP2Case Quantity 100View DetailsMACHINE SCREW FLAT HEAD PHILLIPS 1/4″-20 X 3/4″ BLACK ZINC
SKU: X1420X34FHP2 Categories: Bolts, Fasteners- FLAT HEAD
- BLACK OXIDE
- Machine screws form a fastening superior in strength to spaced thread screws.
- Made from AISI 1006-1022 or equivalent steel.
- Flat head Phillips.
Case Quantity: 100 -
MACHINE SCREW HEX HEAD TYP-F #10-24 X 1″ THREAD CUTTING
MACHINE SCREW HEX HEAD TYP-F #10-24 X 1″ THREAD CUTTINGPart # 1024X1HTYFCase Quantity 100View DetailsMACHINE SCREW HEX HEAD TYP-F #10-24 X 1″ THREAD CUTTING
SKU: 1024X1HTYF Categories: Fasteners, Screws- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 10-24 diameter.
- Length of 1″.
Case Quantity: 100 -
MACHINE SCREW HEX HEAD TYP-F #10-24 X 1/2″ THREAD CUTTING
MACHINE SCREW HEX HEAD TYP-F #10-24 X 1/2″ THREAD CUTTINGPart # 1024X12HTYFCase Quantity 100View DetailsMACHINE SCREW HEX HEAD TYP-F #10-24 X 1/2″ THREAD CUTTING
SKU: 1024X12HTYF Categories: Fasteners, Screws- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 10-24 diameter.
- Length of 1/2″.
Case Quantity: 100 -
MACHINE SCREW HEX HEAD TYP-F #10-24 X 3/4″ THREAD CUTTING
MACHINE SCREW HEX HEAD TYP-F #10-24 X 3/4″ THREAD CUTTINGPart # 1024X34HTYFCase Quantity 100View DetailsMACHINE SCREW HEX HEAD TYP-F #10-24 X 3/4″ THREAD CUTTING
SKU: 1024X34HTYF Categories: Fasteners, Screws- A thread cutting screw with machined screw thread pitch, blunt point, tapered entering threads and multiple cutting edges.
- Steel thread-cutters are used in heavy gauge sheet metal, aluminum, zinc and lead die castings, cast iron, brass and plastic.
- When using any thread-cutting screw, the material in which the threads are cut should have a lower hardness by at least 10 to 20 Rockwell hardness points.
- Made from zinc plated AISI 1016-1024 steel or equivalent.
- Type F thread cutting style.
- Hex washer slotted head.
- 10-24 diameter.
- Length of 3/4″.
Case Quantity: 100