Pipe & Tube Fittings
Showing 625–636 of 752 results
-
PUSH-LOCK MALE CONNECTOR 1/2″ T X 3/8″ P COMPOSITE
Read morePUSH-LOCK MALE CONNECTOR 1/2″ T X 3/8″ P COMPOSITE
SKU: XV016186 Categories: Composite, Pipe & Tube Fittings- 1/2″ T X 3/8″ P, PUSH IN A/B
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- Size 1/8″ tubing o.d., 1/16″ male pipe
Case Quantity: 5 -
PUSH-LOCK MALE CONNECTOR 3/8″ T X 1/2″ P COMPOSITE
Read morePUSH-LOCK MALE CONNECTOR 3/8″ T X 1/2″ P COMPOSITE
SKU: XV016168 Categories: Composite, Pipe & Tube Fittings- Push to connect composite connector
- Easy to assemble and is reusable
- Designed to resist mechanical pull out
- Meets performance requirements as stated in SAE J1131
- DOT 49 CFR 571.106 compliant
- For use with SAE J844 tubing
- Working pressure: up to 145 psi
- Temperature range of -40F to +140F
- 3/8″ tube to 1/2″ male Pipe
Case Quantity: 5 -
PUSHLOCK 90 MALE SWIVEL ELBOW 5/8″ T X 1/2″ P
Read morePUSHLOCK 90 MALE SWIVEL ELBOW 5/8″ T X 1/2″ P
SKU: XV016281 Categories: Composite, Pipe & Tube Fittings- These are the quick disconnect version of nylon air brake (DOT) brass fittings.
- They are DOT approved and will be marked as such.
- Used with SAE J844 nylon tubing, no special tools required.
- There are no nuts or sleeves used in their application.
- 90° male elbow, non swivel
Case Quantity: 1 -
SAE 45 DEGREE FLARE BRASS UNION 1/2″
Read moreSAE 45 DEGREE FLARE BRASS UNION 1/2″
SKU: X42X8 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/2″ tube
Case Quantity: 5 -
SAE 45 DEGREE FLARE BRASS UNION 1/4″
Read moreSAE 45 DEGREE FLARE BRASS UNION 1/4″
SKU: X42X4 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/4″ tube
Case Quantity: 5 -
SAE 45 DEGREE FLARE BRASS UNION 1/8″
Read moreSAE 45 DEGREE FLARE BRASS UNION 1/8″
SKU: X42X2 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 1/8″ tube
Case Quantity: 5 -
SAE 45 DEGREE FLARE BRASS UNION 3/8″
Read moreSAE 45 DEGREE FLARE BRASS UNION 3/8″
SKU: X42X6 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 3/8″ tube
Case Quantity: 5 -
SAE 45 DEGREE FLARE BRASS UNION 5/16″
Read moreSAE 45 DEGREE FLARE BRASS UNION 5/16″
SKU: X42X5 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 5/16″ tube
Case Quantity: 5 -
SAE 45 DEGREE FLARE BRASS UNION 5/8″
Read moreSAE 45 DEGREE FLARE BRASS UNION 5/8″
SKU: X42X10 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Union connector, tube x tube
- Size 5/8″ tube
Case Quantity: 5 -
SAE 45 DEGREE FLARE LONG NUT 1/2″
Read moreSAE 45 DEGREE FLARE LONG NUT 1/2″
SKU: X41X8 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Long nut
- Size 1/2″ tube
Case Quantity: 10 -
SAE 45 DEGREE FLARE LONG NUT 1/4″
Read moreSAE 45 DEGREE FLARE LONG NUT 1/4″
SKU: X41X4 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Long nut
- Size 1/4″ tube
Case Quantity: 10 -
SAE 45 DEGREE FLARE LONG NUT 3/8″
Read moreSAE 45 DEGREE FLARE LONG NUT 3/8″
SKU: X41X6 Categories: Brass Fittings, Pipe & Tube Fittings- SAE 45 Degree Flare
- Manufactured from either CA360, CA345 or CA377 brass.
- Meets functional requirements of SAE J512 and J513.
- Used with copper, brass, aluminum and steel hydraulic tubing.
- The tubing is flared on one end to accept the brass fitting.
- This type of fitting has the cone shape on the straight thread end.
- This fitting is used with LP and natural gas, instrumentation, power steering, hydraulic and pneumatic systems.
- Long nut
- Size 3/8″ tube
Case Quantity: 10