$49.00 remaining until Free Shipping
Search
RSS
New products
FINISH WASHER COUNTER-SUNK #12
XCSFW12Z
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
FINISH WASHER COUNTER-SUNK #10
XCSFW10Z
- A circular washer designed for use with flat or oval head screws.
- Designed for accommodating the heads of countersunk screws.
- Provides additional bearing area on the material being fastened.
- Provides a neat, finished appearance.
- Made from 18-8 stainless steel.
NITRILE GLOVES BLACK 4MIL EXTRA LARGE 100/BOX
XLG2015WXL
- Black nitrile gloves
- 100 gloves per box
- Powder-free
- Micro-textured finger tips
- Ambidexterous
- Complies with federal regulations for food contact
NITRILE GLOVES BLACK 4MIL LARGE 100/BOX
XLG2015WL
- Black nitrile gloves
- 100 gloves per box
- Powder-free
- Micro-textured finger tips
- Ambidexterous
- Complies with federal regulations for food contact
NITRILE GLOVES 8 MIL X LARGE HI-VIS ORANGE 100/BX
NGXLT-HD
- Orange embossed diamond grip nitrile gloves
- 100 gloves per box
- Powder-free
- Ambidexterous
- Complies with federal regulations for food contact
NITRILE GLOVES 8 MIL LARGE HI-VIS ORANGE 100/BOX
NGLT-HD
- Orange embossed diamond grip nitrile gloves
- 100 gloves per box
- Powder-free
- Ambidexterous
- Complies with federal regulations for food contact
NITRILE GLOVES 8 MIL MEDIUM HI-VIS ORANGE 100/BOX
NGMT-HD
- Orange embossed diamond grip nitrile gloves
- 100 gloves per box
- Powder-free
- Ambidexterous
- Complies with federal regulations for food contact
HAND SANITIZER 10 OUNCE
HNDSAN10
- 75% Ethyl Alcohol
- 10oz. with Hand Pump
- Kills 99.99% of Germs
- Wash Free Gel
- Scented (grape)
SHEET METAL SCREW PHIL PAN HD #6 X 3/8"
6X38P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 3/8"
SHEET METAL SCREW OVAL PHIL HD #6 X 3/8" STAINLESS
6X38OP
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- A countersunk head with a rounded top surface and a cone-shaped bearing surface.
- Preferred over a flat head in conical applications, or when a more decorative finished look is desired.
- The countersunk surface nests into mating countersunk application sites.
- Oval head, phillips drive
- Screw diameter 6
- Screw length 3/8 inch
SHEET METAL SCREW HEX WASH HD #6 X 3/8"
6X38H
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Has an indented top surface, six flat sides with a flat washer which projects beyond the sides and provides a flat bearing surface.
- The washer and head are formed together as one piece. (Hex washer slotted head)
- Increased bearing area reduces likelihood of crushing mating surfaces.
- Zinc plated steel.
- Screw diameter 6
- Screw length 3/8 inch
SHEET METAL SCREW PHIL PAN HD #6 X 3/4" STAINLESS
6X34PSS
- A thread forming stainless tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Pan heads have a rounded top surface, cylindrical sides and a flat bearing surface.
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Pan head, phillips drive
- Screw diameter 6
- Screw length 3/4 inch
SHEET METAL SCREW PHIL PAN HD #6 X 3/4"
6X34P
- A thread forming tapping screw with spaced threads and a gimlet point.
- For self starting in thin metal or resin-filled plywood.
- Phillips Pan Head
- For general applications.
- Can be substituted in most applications for round, truss or binding screws.
- Steel zinc plated.
- Diameter: 6
- Length: 3/4"
HEX CAP SCREW BOLT METRIC ZINC M6-1.0 X 50, CL 8.8
6X50M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M6-1.0.
- Length: 50 mm.
HEX CAP SCREW BOLT METRIC ZINC M6-1.0 X 45, CL 8.8
6X45M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M6-1.0.
- Length: 45 mm.
HEX CAP SCREW BOLT METRIC ZINC M6-1.0 X 40, CL 8.8
6X40M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M6-1.0.
- Length: 40 mm.
HEX CAP SCREW BOLT METRIC ZINC M6-1.0 X 35, CL 8.8
6X35M
- Hex head cap screw with metric thread pitch made from medium carbon steel.
- Heat treated.
- Tensile strength: 800 Newtons/mm² minimum.
- Zinc plated.
- Metric coarse threads.
- Diameter: M6-1.0.
- Length: 35 mm.
ROLL PIN - PLAIN FINISH 7/32" X 2"
7322RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 7/32
- Length is 2 inches
ROLL PIN - PLAIN FINISH 7/32" X 1"
7321RP
- Standard single-turned pin with a longitudinal slot and chamfered ends to facilitate installation.
- Used as locking devices, positioning points, anti-chafing surfaces, shaft, or sleeves for wiring.
- Usage is limited only by your imagination and technological capabilities.
- Spring pins require only a straight drilled hole and may be installed using automatic equipment.
- Reusable.
- Carbon steel, plain finish material
- Diameter is 7/32
- Length is 1 inch
Payment options
