Menu
Search
800-486-6674
Search Close
Shop Now
    Menu Close
    8N5811.jpg

    HEX NUT UNC ZINC 5/8"-11 GR 8

    • A finished hex nut made from low carbon steel.
    • For use with grade 8 bolts.
    • Proof load: 150,000 psi.
    • Size: 5/8"-11.
    • Yellow zinc plated.
      Item #: 8N5811
      Customers who bought this item also bought
      2TY11.png

      CABLE TIE 11", BLACK, 50 LB TS

      2TY11
      • Variety of applications across commercial and industrial settings.
      • 11.8" long x .18 wide
      • Black
      • 50 lb. tensile strength
      • 3.35" max bundle diameter
      • -40°F to +185°F (-40°C to +85°C) continuous operating temperature
      • Made from nylon 6/6, UV resistant.
      • Meets flammability test UL94 V2.
      • UL listed.
        CSFW14.png

        FINISH WASHER COUNTER-SUNK SS #10

        CSFW10
        • A circular washer designed for use with flat or oval head screws.
        • Designed for accommodating the heads of countersunk screws.
        • Provides additional bearing area on the material being fastened.
        • Provides a neat, finished appearance.
        • Made from 18-8 stainless steel.
          FW50SS.png

          FLAT WASHER USS STAINLESS #6

          FW6SS
          • Used to improve stress distribution, and to span large holes.
          • USS PATTERN.
          • Used where parts are subject to corrosion.
          • Made from 18-8 stainless steel.
            LN1213SS.png

            LOCK NUT NYLON UNC STAINLESS 1/4"-20

            LN1420SS
            • Hex nut with a nylon-filled collar at its back end.
            • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
            • Restricts movement of the screw when it is subjected to vibration.
            • Designed to be used with stainless steel machine screws and bolts.
            • Reusable.
            • The nylon collar will begin to deteriorate at temperature from 150 to 350° F.
            • Made form 18-8 or equivalent stainless steel.
            • Size: 1/4"-20.
              LW50SS.png

              LOCK WASHER SPLIT STAINLESS #10

              LW10SS
              • A coiled, hardened split circular washer with a slightly trapezoidal wire section.
              • Applies greater bolt tension per unit of applied torque.
              • Provides a hardened bearing surface and more uniform load distribution.
              • Stainless Steel.
              • Resists loosening caused by vibration and corrosion.
              • For use with stainless nuts and screws of a similar stainless alloy.
              • Rockwell Hardness: C35-43
              • Inside Diameter: Min .193 Max .200
              • Outside Diameter: 0.334
                Information
                My account
                Customer service

                Payment options

                Copyright © 2021 RAM Products. All rights reserved.