Search
800-486-6674
Shop Now
    Menu Close

    LOCK WASHER SPLIT USS ZINC 7/16" HIGH ALLOY

    Manufacturer: - No Manufacturer -
    • A coiled, hardened split circular washer with a slightly trapezoidal wire section.
    • Applies greater bolt tension per unit of applied torque.
    • Provides a hardened bearing surface and more uniform load distribution.
    • Steel, yellow zinc plated.
    • Resists loosening caused by vibration and corrosion.
    • For use with grade 8 bolts.
    • Rockwell Hardness: C38-46
    • Inside Diameter: Min .440 Max .450
    • Outside Diameter: 0.776
      Item #: 8LW76
      Customers who bought this item also bought

      FLAT WASHER USS STAINLESS 3/8"

      FW38SS
      • Used to improve stress distribution, and to span large holes.
      • USS PATTERN.
      • Used where parts are subject to corrosion.
      • Made from 18-8 stainless steel.
      • Outside Diameter: 1"
      • Inside Diameter: 7/16"

        FLAT WASHER USS STAINLESS 5/16"

        FW56SS
        • Used to improve stress distribution, and to span large holes.
        • USS PATTERN.
        • Used where parts are subject to corrosion.
        • Made from 18-8 stainless steel.
        • Outside Diameter: 7/8"
        • Inside Diameter: 3/8"

          TERMINAL BUTT HEAT SHRINK 12-10 GAUGE

          HSC-C
          • Wire terminal that is designed to allow the connection of two wires in line.
          • Also known as butt splice.
          • Wire gauge: 12-10.
          • Heat shrink insulated.
          • Operating temperature range: -67° F to 257° F.
          • Insulation color: yellow.
          • 600 volt max.
          • 100 per bag.

            TERMINAL RING HEAT SHRINK 12-10 GAUGE, 3/8" STUD

            HSRC38-C
            • Ring terminals connect one or more wires to a single connection point.
            • Heat shrink insulated.
            • Insulation color: yellow.
            • Stud size: 3/8".
            • Wire gauge: 12-10.
            • 100 terminals per pack.

              LOCK WASHER SPLIT STAINLESS #10

              LW10SS
              • A coiled, hardened split circular washer with a slightly trapezoidal wire section.
              • Applies greater bolt tension per unit of applied torque.
              • Provides a hardened bearing surface and more uniform load distribution.
              • Stainless Steel.
              • Resists loosening caused by vibration and corrosion.
              • For use with stainless nuts and screws of a similar stainless alloy.
              • Rockwell Hardness: C35-43
              • Inside Diameter: Min .193 Max .200
              • Outside Diameter: 0.334