Search
800-486-6674
Shop Now
    Menu Close

    LOCK WASHER SPLIT USS ZINC 3/4" HIGH ALLOY

    • A coiled, hardened split circular washer with a slightly trapezoidal wire section.
    • Applies greater bolt tension per unit of applied torque.
    • Provides a hardened bearing surface and more uniform load distribution.
    • Steel, yellow zinc plated.
    • Resists loosening caused by vibration and corrosion.
    • For use with grade 8 bolts.
    • Rockwell Hardness: C38-46
    • Inside Diameter: Min .753 Max .766
    • Outside Diameter: 1.265
      Item #: 8LW34
      Customers who bought this item also bought

      CABLE TIE 11", BLACK, 50 LB TS

      2TY11
      • Variety of applications across commercial and industrial settings.
      • 11.8" long x .18 wide
      • Black
      • 50 lb. tensile strength
      • 3.35" max bundle diameter
      • -40°F to +185°F (-40°C to +85°C) continuous operating temperature
      • Made from nylon 6/6, UV resistant.
      • Meets flammability test UL94 V2.
      • UL listed.

        CABLE TIE 15", BLACK, 50 LB TS

        2TY15
        • Variety of applications across commercial and industrial settings.
        • 15.35" long x .18 wide
        • Black
        • 50 lb. tensile strength
        • 4.33" max bundle diameter
        • -40°F to +185°F (-40°C to +85°C) continuous operating temperature
        • Made from nylon 6/6, UV resistant.
        • Meets flammability test UL94 V2.
        • UL listed.

          LOCK NUT NYLON UNC ZINC 1/2"-13 GR 8

          X8LN1213
          • Hex nut with a nylon-filled collar at its back end.
          • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
          • Restricts movement of the screw when it is subjected to vibration.
          • Designed to be used in structural application with Grade 8 cap screws or bolts.
          • Applications include engines, turbines, hydraulic cylinders, railroads and aerospace.
          • Nylon inserts nuts are not designed to be used at temperatures over 250° F.
          • Made from heat treated steel.
          • Proof load: 150,000 psi.
          • Size: 1/2"-13.
          • Yellow zinc plated.

            LOCK NUT NYLON UNC ZINC 5/16"-18 GR 8

            X8LN5618
            • Hex nut with a nylon-filled collar at its back end.
            • When a screw reaches the collar, the threads and nylon engage for a tight, frictional fit.
            • Restricts movement of the screw when it is subjected to vibration.
            • Designed to be used in structural application with Grade 8 cap screws or bolts.
            • Applications include engines, turbines, hydraulic cylinders, railroads and aerospace.
            • Nylon inserts nuts are not designed to be used at temperatures over 250° F.
            • Made from heat treated steel.
            • Proof load: 150,000 psi.
            • Size: 5/16"-18.
            • Yellow zinc plated.

              FLAT WASHER USS ZINC 1/2" THRU HARDENED

              8FW50
              • Used to improve stress distribution, and to span large holes.
              • USS PATTERN.
              • Made from heat treated thru-hardened steel, zinc yellow.
              • Outside Diameter: 1-3/8"
              • Inside Diameter: 9/16"