Abrasives
Showing 25–36 of 225 results
-
ABRASIVE HAND PAD ULTRA FINE, LIGHT GRAY
Read moreABRASIVE HAND PAD ULTRA FINE, LIGHT GRAY
SKU: X3M07448 Categories: Abrasives, Hand Pads- Non-woven nylon/polyester fiber.
- Very fine aluminum oxide mineral.
- Load resistant.
- 9″ long x 6″ wide.
- 1/4″ thick.
Case Quantity: 20 -
BACKING PAD FOR RESIN FIBER DISCS 4-1/2″ 5/8 ARBOR
Read moreBACKING PAD FOR RESIN FIBER DISCS 4-1/2″ 5/8 ARBOR
SKU: XUA95011 Category: Abrasives- 5/8″ arbor
- Max rpm 11,000
- Spiral ribs provide contact points and form channels for air flow.
- Exclusive rubber, fabric and fiber board construction provide extra strength and reliability.
Case Quantity: 1 -
BRUSH SMALL CLEANING BRASS W/ PLASTIC HANDLE
Read moreBRUSH SMALL CLEANING BRASS W/ PLASTIC HANDLE
SKU: XUA05768 Categories: Abrasives, Hand Brush- Size 3×7
- Wire size .006″
- Small cleaning brush with plastic handle
- Excellent for light scale removal
Case Quantity: 1 -
CHOP SAW WHEEL TYPE 1 14″ X 3/32″ X 1″ ARBOR
Read moreCHOP SAW WHEEL TYPE 1 14″ X 3/32″ X 1″ ARBOR
SKU: XCSW14X332X1 Categories: Abrasives, Chop Saw Blades- 14″ diameter Double Reinforced
- 3/32″ Thick
- 1″ arbor
- 4,400 Max RPM
- Zironia Aluminum Oxide
- For steel and stainless
- High performance cutting, recommened on thicker stock applications such as angle iron, angle bars
Case Quantity: 1 -
CHOP SAW WHEEL TYPE 1, 14″ DIAM, 3/32″ WIDTH, 1″
Read moreCHOP SAW WHEEL TYPE 1, 14″ DIAM, 3/32″ WIDTH, 1″
SKU: CSW14X332X1 Categories: Abrasives, Chop Saw Blades- 14″ Diameter
- 3/32″ Width
- 1″ Bore
- 4,400 Max RPM
- Iron worker chop saw wheel. Fast cutting.
- Specially formulated for use on low horsepower chop saw machines for fast cutting with minimal pressure.
- Aluminum oxide grain.
- Excellent for use on angle iron, channel iron, heavy rebar, and other ferrous metals.
- For use in structural metal applications.
Case Quantity: 1 -
CRIMPED WIRE END BRUSH, 1″ X .014″ X 1/4″ SHANK
Read moreCRIMPED WIRE END BRUSH, 1″ X .014″ X 1/4″ SHANK
SKU: XCGW60592 Category: Abrasives- 1″ diameter
- Wire size .014
- Trim Length 1″
- 20,000 Max RPM
- Crimped Carbon 1/4″ shank size
- For pipeline cleaning, equipment maintenance, removal of rust or scale
Case Quantity: 1 -
CRIMPED WIRE WHEEL 2 X .014
Read moreCRIMPED WIRE WHEEL 2 X .014
SKU: XUA06712 Category: Abrasives- 2″ diameter
- 1/4″ shank .014 Wire Size
- Crimped Wire End Brush
- 25,000 Max RPM
- For use on portable power tools
- Excellent for use in cleaning and finishing recessed areas or pipes
- High flexibility
Case Quantity: 1 -
CRIMPED WIRE WHEEL 3″ X .014
Read moreCRIMPED WIRE WHEEL 3″ X .014
SKU: XUA02713 Categories: Abrasives, Wire Wheel- 3″ diameter
- Wire size .014″
- Trim length 15/16″
- Ma rpm 25,000
- For use on portable power tools
Case Quantity: 1 -
CUP BRUSH 2 3/4 X .020 5/8-11 ARBOR
Read moreCUP BRUSH 2 3/4 X .020 5/8-11 ARBOR
SKU: XUA06501 Categories: Abrasives, Wire End Brush- 2-3/4: diameter
- Wire size .020″
- Max rpm 14,000
- Arbor 5/8-11
- For use on small grinders
Case Quantity: 1 -
CUP BRUSH 2 3/4 X .020 5/8-11 ARBOR KNOT STYLE
Read moreCUP BRUSH 2 3/4 X .020 5/8-11 ARBOR KNOT STYLE
SKU: XUA03501 Category: Abrasives- 2-3/4″ diameter
- 5/8-11 arbor .020 Wire Size
- Knot cup wheel
- 14,000 Max RPM
- For low to medium flexibilty and aggressive cutting action
Case Quantity: 1 -
CUT OFF WHEEL 6″ X .045″ X 7/8″ TYPE 1, ALUMINUM OXIDE WITH ZIRCONIA AO
CUT OFF WHEEL 6″ X .045″ X 7/8″ TYPE 1, ALUMINUM OXIDE WITH ZIRCONIA AOPart # XCGW35517Case Quantity 25View DetailsCUT OFF WHEEL 6″ X .045″ X 7/8″ TYPE 1, ALUMINUM OXIDE WITH ZIRCONIA AO
SKU: XCGW35517 Category: Abrasives- 6″ diameter
- .045 width
- 7/8″ bore
- 10,200 Max RPM
- Type 1 fast cutting cut off wheel
- Rigid design for fast cutting and longer life
Case Quantity: 25 -
CUT OFF WHEEL 3 TYPE 1 3 X 1/16 X 3/8
Read moreCUT OFF WHEEL 3 TYPE 1 3 X 1/16 X 3/8
SKU: XUA23140 Categories: Abrasives, Cut Off Wheels- 3″ Diameter
- 1/16″ Width
- 3/8″ Bore
- 25,000 Max RPM
- Type 1 fast cutting cut off wheel.
- For use with die grinder.
- High performance, ceramic aluminum oxide grain
- Uniform, high density grain structure for extreme durability, cooler cut and longer life.
- Great for ferrous metals (iron, steel, welds, etc.) non ferrous metals (aluminum, copper, brass, etc.) Also good for stainless steel
Case Quantity: 5